HOW TO USE:

Spray a light mist onto the surface,

2. Using a lightly dampened cloth wipe over the area just treated

3. Buff dry using a second fresh cloth to leave a perfect streak free surface. Repeat for heavily stained/soiled surfaces.

The post Autoperfekt – Interior + appeared first on Autopia.

HOW TO USE:

1. Using the two bucket method add up to 50ml to warm water in your wash Bucket.

2. Allow Your chosen mitt to soak for a few minutes. We recommend a little dab extra of shampoo on the mitt also.

3. Massage mitt across the surface removing any dirt and soiling from the top downwards taking care to rinse mitt after each panel in your fresh water bucket..

4. Rinse throughly from the top down.

The post Autoperfekt – Simply + ( Exterior Shampoo ) appeared first on Autopia.

How to use:

Spray directly from the bottle onto a panel at a time. Using a clean plush Microfibre spread generously and allow to haze for a moment.

Flipping the Microfibre over buff the current panel to a glorious shine.

Perfect for those darker coloured cars.

The post Autoperfekt – Finisher + ( Spray Wax ) appeared first on Autopia.

Pro-PerfeKt Ceramic range is our own fully developed in-house formulas, created to offer unique, and innovative products to both consumers and detailers (product dependant).

Pro-PerfeKt Ceramic range is our own fully developed in-house formulas, created to offer unique, and innovative products to both consumers and Accredited only detailers (product dependant).

our range consists of:

* BOOSTsi – Ceramic Sealant/booster spray

* unique Ceramic Coatings

* Ceramic non wax Paste

* quartz shampoo

The post Autoperfekt – BOOSTsi – Ceramic Spray Sealant appeared first on Autopia.

How to use:

Use 2 microfibre clothes (1 damp & 1 dry).

1. Shake well & Spray a light mist directly onto the surface.

2. Wipe the misted surface with the damp cloth.

3. Buff the coated area to a streak free shine with the dry cloth.

4. Repeat one panel at a time. Allow 15 minutes to cure before applying a wax or glaze product. skinseal+ can be layered for even tougher glossier protection.

The post Autoperfekt – Interior Pro appeared first on Autopia.

How to use:

Use 2 microfibre clothes (1 damp & 1 dry).

1. Shake well & Spray a light mist directly onto the surface.

2. Wipe the misted surface with the damp cloth.

3. Buff the coated area to a streak free shine with the dry cloth.

4. Repeat one panel at a time. Allow 15 minutes to cure before applying a wax or glaze product. skinseal+ can be layered for even tougher glossier protection.

The post Autoperfekt – SkinSeal – nano polymer sealant appeared first on Autopia.

Alloy + is a non caustic alkaline wheel cleaner that’s exceptionally good at removing dirt grease and grime.

Amazing at cutting through the toughest grime and brake dust A Simple spray on rinse off application is also possible. It will remove lightly baked on brake dust without agitation though will benefit from being used in conjunction with an appropriate brush, mitt or cloth. The Non-Caustic Formula makes for a safer clean and minimises the chances of flash corrosion on exposed components. A concentrated low cost product with excellent cleaning power. Ideally use as a duo prior to D-Iron fall out, for the perfect cleaning combination

Directions

• Dilutions of up to 1:40 can be used for lightly soiled wheels.

  Use up to 1:4 heavily soiled wheels

  1. Spray onto tyres and alloy wheels both inside and out

  2. allow a minute or or two for Alloy+ to quickly break down dirt and grime.

  3. rinse of with water or with dedicated wheels cleaning tools throughly scrub the tyre walls and wheels before rinsing off with fresh clean water to reveal a sparkling clean finish.

The post Autoperfekt – Alloy + ( Alloy Cleaner ) appeared first on Autopia.

How to use:

Shake bottle well and apply a small amount onto a tyre applicator or sponge.

Dab 3 or 4 dots around the tyre and gently spread your applicator around the whole tyre wall creating an even, long lasting layer with supreme shine. Stand back and admire.

Note: Should the dressing be a little too glossy for some who like a more satin finish, use a fresh Microfibre and gently dab round the tyre and take your shine down to the level you want.

The post Autoperfekt -Motion – tyre coating appeared first on Autopia.

HOW TO USE:

1. use neat and spray on alloy faces and inner rims starting with the upper most part so the solution can work its way down the alloy lifting as it moves..

2. Depending on the level of contamination, leave for up to 5 minutes and rinse, or agitate with a dedicated wheel brush and mitt that has been soaking in clean soap solution.

3. Rinse all residue off ensuring non is still left on the wheel.

Caution-in hot weather do not allow fall out remover to dry onto wheels.

The post Autoperfekt -D-iron – fallout remover appeared first on Autopia.

Apply Citrus+ to all the soiled areas of the car paying attention to areas that are heavily covered in bugs and grime. Allow up to ten minutes to dwell and rinse of with a high pressure washer making way for Foam+ to be applied.

For engine bays, spray onto desired areas and use a detailers brush and agitate any tough grease and dirt. Spray again and wipe off using a clean Microfibre cloth.

The post Autoperfekt – Citrus + degreaser & prewash appeared first on Autopia.