Collinite Archives - Autopia

Collinite 83 Foamr Auto & Boat Wash Shampoo – 473ml

Conor Gill — Wed, 08 Apr 2026 10:13:53 +0000

Collinite Foamr is a pH neutral, highly concentrated & versatile shampoo that produces a lasting foam and ultra-rich gloss.

This high-sudsing, slick formula safely loosens dirt, grime and scum from your paint work/fibreglass while providing a swirl free finish. It’s designed for preserving a wax, sealant or ceramic coating.

Foamr is for use on all exterior surfaces including paint, clear coat, chrome, PPF, matte, gel coat, plastic and glass. It’s designed for both foam cannon and hand/bucket use.

Directions:

Make sure vehicle/vessel’s surface is cool (not hot) to the touch.

Hand/Bucket Use: Mix 1-1.5oz per 2 gallons of water. Set hose nozzle to “jet/stream” and spray directly into bucket to create foam. Using desired wash mitt, wash surface thoroughly from top to bottom. Rinse each section with hose/water. *Using a 2nd rinse bucket (clean, cool water) will help clean/loosen debris from mitt between sections. When complete, dry all remaining water from surface with drying towel to prevent water spots.

Foam Cannon Use: Mix 3-4oz into 30oz of water in cannon reservoir. Shake well to properly distribute soap. Cover entire surface with foam cannon and allow to cling/dwell for 2-4 minutes. Rinse with water.

Size: 473ml (16oz)

The post Collinite 83 Foamr Auto & Boat Wash Shampoo – 473ml appeared first on Autopia.

Collinite 21 All In Ceramic Interior – 473ml

Conor Gill — Wed, 08 Apr 2026 09:54:16 +0000

Collinite’s new All-In Ceramic Interior Detailer gently cleans all interior automotive surfaces while leaving behind SiO2 protection.

This dual-action innovative formula works great on vinyl, plastics, leather, fabrics, navigation screens and rubber. It leaves behind a matte, non-greasy finish that helps reduce dust attraction while protecting against stains, salt, UV rays & more.

Directions:

Spray detailer liberally onto a microfibre towel.
Spread product quickly over surface to be cleaned/detailed.
Flip towel and wipe dry immediately with dry side of towel. For stronger cleaning on leather, vinyl and plastics, spray product directly onto the surface to be treated. Work in with a fine bristled interior detailing brush if necessary. Always wipe residue with a microfibre towel.

Size: 473ml (16oz)

Product Code: COL-21

The post Collinite 21 All In Ceramic Interior – 473ml appeared first on Autopia.

Collinite No.520 ‘Mister Collins’ Detailer – 473ml

Conor Gill — Wed, 03 Sep 2025 15:20:22 +0000

Collinite #520 ‘Mister Collins’ Detailer

Collinite #520 ‘Mister Collins’ Detailer is a all new Quick Detailers that combines high lubricity cleansers with Collinite’s legendary polymer-carnauba wax protection for a unique bead and sheet shine.

Collinite No. 520 safely and easily eliminates light contaminants between washes while enhancing your Collinite No. 845, 476 or 915 wax look and durability. Ideal for fast touch ups; removal of light water spots, prints, smudges, dust, pollen, droppings, automatic car wash residue and more. Leaves behind a lasting, high gloss shine that beads AND sheets.

Recommended for exterior surfaces only; paint (non-matte) and trim.

Quick and easy to use
Removes light water spots, prints, smudges, wash residue and more
Insulated with Collinite wax to protect & preserve 476, 845 or 915 look and bond
Leaves behind a high gloss, bead & sheet shine

16fl/oz (473ml) Bottle with sprayer

Directions:

Shake well before using. For best results use a 2 microfiber towel process. Mist product onto one 3×3 ft section at a time. With towel 1 folded into a pad, quickly spread product evenly on surface.

Before product dries, use dry section of towel 2 to wipe and buff surface to a high gloss shine. Flip and change towels as necessary.

The post Collinite No.520 ‘Mister Collins’ Detailer – 473ml appeared first on Autopia.

Collinite No.390 Pre-Wax Auto Polish – 473ml

Autopia — Wed, 26 Mar 2025 12:03:11 +0000

Collinite 390 Pre-Wax Auto Polish is pre-wax cleaner which contains micro abrasives to eliminate minor paint defects like fine scratches, water spots, holograms and mild oxidation whilst finishing down to a high gloss.

Collinite 390 perfectly prepares the paint surface for the application of a wax improving its bond and therefore maximising it’s performance.

Features:

– Eliminate fine scratches, water spots, holograms and mild oxidation

– Finishes down to a high gloss

– Prepares the paintwork for the application of wax

– Hand or machine use

Directions:

Ensure vehicle is clean and free of contamination (tar, fallout, overspray etc). Shake bottle well and apply to an applicator and work into the paintwork. Remove residue with a clean microfibre towel immediately, no need to let it cure/dry on the surface.

Size: 473ml (16oz)

The post Collinite No.390 Pre-Wax Auto Polish – 473ml appeared first on Autopia.

Collinite No.150 Slickr 3in1 Ceramic Detailer 473 ml

Autopia — Thu, 29 Aug 2024 10:21:46 +0000

Collinite Slickr 3 in 1 Ceramic Detailer quickly & easily adds hydrophobic water beading properties and a high gloss, hyper-slick finish to a variety of exterior automotive surfaces.

With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.

Directions:

Always test product first in a small, inconspicuous area to ensure desired result.

As a lubricating drying aid: Following a wash, while vehicle surface is still wet, apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfibre towel, wipe entirety of panel until dry. Flip towel as necessary and change towels as they become saturated. Repeat process on all painted surfaces (and glass).

As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberised side). With minimal pressure, move decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry microfibre towel. Repeat process on all painted surfaces (and glass).

Features:

Extremely slick finish
Removes light dust, fingerprints and smudges
Up to 3 months hydrophobics
Easy wipe on wipe off high gloss shine
Use on paint, glass, wheels and trim
Can be used as clay lubricant, drying aid, show car prep
Topper over waxes, sealants, ceramic coatings, paint protection film
Average Spread/Coverage: 600-1,000 sq ft

Size: 473ml (16oz)

The post Collinite No.150 Slickr 3in1 Ceramic Detailer 473 ml appeared first on Autopia.

Collinite 435 Black Streak Remover + Protector – 473ml

Autopia — Thu, 01 Aug 2024 15:06:23 +0000

Collinite 435 Streak Fixer is the perfect product for remove those annoying black streaks on painted surfaces that sometimes appear under the ends of plastic trim pieces/wing mirrors etc.

Easy to use and quick it also leaves behind a layer of protection to make tidy those areas up a quick and simple process.

Easy to use No. 435 Black Streak Remover + Protector safely and effectively eliminates black streaks, tough stains and fresh water spots from painted surfaces. Quickly restores the finish while leaving behind fast-bonding polymer surface protection. Safe for use on fiberglass, metal and painted surfaces.

No. 435 features a fast bond polymer additive which will not remove your existing coat of wax. Its unique formula gently lifts surface born contaminants such as black streaks, mild scum, water spots and stains. No. 435 can be used as a quick detailer to keep surfaces free of stains and protected.

Not for glass or upholstery. Not designed for oxidation removal where a compound or polish would be better utilized, or heavily soiled surfaces requiring a pre-wash.

How To Use

TIP: Always test the product first in a small, inconspicuous area to ensure the desired result.

Directions: Shake well before using. Using a 2 microfibre towel process, spray product onto a small surface area (1 x 1ft). Apply firmly with the 1st towel to loosen/remove streaks and stains. With a dry section of the 2nd towel, immediately remove product any remaining residue. Flip towels frequently and change towels as necessary. Reapplication of additional products may be required to remove more stubborn stains.

The post Collinite 435 Black Streak Remover + Protector – 473ml appeared first on Autopia.

Collinite 520. Detailer -473 ml

Autopia — Thu, 01 Aug 2024 14:32:53 +0000

This quick detailer is a fast and protective shine between washes. The product easily eliminates light contaminants between washes while enhancing wax look and durability.

All new quick detailer combines high lubricity cleansers + Collinite’s legendary polymer-carnauba wax protection for a unique bead and sheet shine. No. 520 safely and easily eliminates light contaminants between washes while enhancing your Collinite No. 845, 476 or 915 wax look and durability. Ideal for fast touch ups; removal of light water spots, prints, smudges, dust, pollen, droppings, automatic car wash residue and more. Leaves behind a lasting, high gloss shine that beads AND sheets. Recommended for exterior surfaces only; paint (non-matte) and trim.

Features

Quick and easy to use.
Removes light water spots, prints, smudges, wash residue and more.
Insulated with Collinite wax to protect & preserve 476, 845 or 915 look and bond.
Leaves behind a high gloss, bead & sheet shine.

Applications

For exterior use only; safe on paint and trim.
NOT recommended for interior use or matte paint.

Application

Shake well before using.
For best results use a 2 microfiber towel process.
Mist product onto one 3×3 ft section at a time.
With towel 1 folded into a pad, quickly spread product evenly on surface.
Before product dries, use dry section of towel 2 to wipe and buff surface to a high gloss shine. Flip and change towels as necessary.

The post Collinite 520. Detailer -473 ml appeared first on Autopia.

Collinite 845 – Insulator Speed Wax – 473ml

Autopia — Thu, 01 Aug 2024 14:23:29 +0000

Based on Collinite’s legendary 845 Insulator Wax, S-845 is a sprayable, easy to use wax that can be used as a topper on paintwork that is already protected with a wax to extend the durability and freshen up the looks and beading or can be used as a stand-alone protection wax giving great levels of protection considering how easy it is to use.

Fast & easy to use, Insulator Speed Wax combines high gloss carnauba shine with Collinite’s legendary polymer durability. Creates a super slick, protective barrier that weather guards for months against contaminants. Can be used as both a gloss booster/protection topper a paste wax or sealant or as a stand-alone wax-sealant protectant. Safe on all exterior painted surfaces and painted trim. Not for use on rubber or glass.

Specification


ADDS PROTECTION	YES
APPLICATION METHOD	BY HAND
DURABILITY	(2 MONTHS)
ENHANCES GLOSS	YES
LAYERABLE	YES (ALLOW 1 HOUR BETWEEN COATS)
RECOMMENDED FOR	ALL PAINT TYPES AND COLOURS
TRIM-SAFE	NO

How To Use

TIP: Always test the product first in a small, inconspicuous area to ensure the desired result.
Directions: Shake well before use. For best results, apply product to only clean/decontaminated surfaces (clayed and/or polished if necessary) using a microfibre applicator or microfibre towel folded into quarters. Use a 2nd (dry) microfibre towel for removal. Apply 3-4 sprays of product directly onto a 3x3ft area. Spread evenly in a uniform pattern. Before the product completely dries, remove with a dry, clean microfibre towel. Flip the removal towel and change as necessary to avoid streaks. After removal, for optimal bonding and protection, allow atleast 1 hour curing time before introducing water or additional coats.

Note: Avoid application to hot surfaces.

The post Collinite 845 – Insulator Speed Wax – 473ml appeared first on Autopia.

Collinite NO. 100 SiO2 Beadcoat Ceramic Sealant- 473ml

Autopia — Thu, 01 Aug 2024 14:14:31 +0000

Featuring an SiO2 + graphene structure, Collinite Beadcoat is an extremely easy-to-use sealant that provides ultra-durable hydrophobics and a high gloss, super slick finish to various automotive exterior surfaces.

DURABILITY : UP TO 6 MONTHS

No.100 Beadcoat SiO2 + Graphene Spray Sealant quickly provides ultra-durable hydrophobics + a high gloss, super slick finish to a variety of automotive exterior surfaces. This easy-to-use formula features a functional ceramic-graphene resin structure and provides 6+ months of stand-alone paint protection and UV/detergent-resistant shine. Beadcoat can also be used to enhance & preserve an existing ceramic or graphene coating. Safe for paint, glass, wheels & trim.

How To Use

TIPS: Always test the product first in a small, inconspicuous area to ensure the desired result.

Directions: For optimal bond/protection, ensure the surface is free of above-surface contamination; this can be achieved with iron remover + clay process (towel or bar). Below-surface paint imperfections (swirls/ scratches/marring) should be removed by DA Polish.

Shake well before each use. For best results, only apply product to clean/decontaminated (clayed and/or polished if necessary)surfaces using a microfibre pad or towel folded into 1/4’s. Use a 2nd (dry) microfibre towel for removal. Spray pad/towel twice first to prime/moisten. Next, apply 2-3 sprays directly to the panel and spread evenly in a crosshatch, uniform pattern. Immediately remove with a dry clean microfibre towel. Flip the towel and change as necessary to avoid streaks. After removal- for optimum bonding and durability, allow 24 hours cure time before introducing water to the surface. Avoid application to hot surfaces.

As a lubricating drying aid: Following a wash while vehicle surface is still wet-apply 2 sprays of Beadcoat to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towels as necessary, and change towels as they become saturated. Repeat the process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.

The post Collinite NO. 100 SiO2 Beadcoat Ceramic Sealant- 473ml appeared first on Autopia.

Collinite 360* ALL NITE – Trim Dressing -473ml

Autopia — Thu, 01 Aug 2024 14:06:24 +0000

Collinite 360 ALL NITE Is an easy to use, versatile multi purpose dressing that will restore and darken a wide range of rubber, trim and textured plastic surfaces leaving behind a slick, like new finish.

Easy to use and incredibly versatile water-based No. 360 darkens and revitalizes, leaving behind a like-new, deep look for a wide variety of automotive surfaces; tyres & rubber, interior and exterior trim, textured (not clear) plastic, vinyl, engine bays, tonneau covers & more. Not designed for paint, glass, leather or surfaces where a slick finish is not desired (motorcycle/bike use, mats, pedals, seats, flooring etc.) Ready to use formula.

How To Use

TIP: Always test the product first in a small, inconspicuous area to ensure the desired result.
Spray or wipe NO.360 on a clean and dry surface. Spread the product evenly and allow the product to dry. Avoid over application and in windy conditions, it may be necessary to apply directly to the applicator to avoid overspray. For a more natural look, or to reduce gloss levels an additional wipe down with a towel or pad is recommended.

Note: When applying to tyres, wipe off any excess product especially in uneven/grooved areas to avoid sling which may stain painted surfaces.

The post Collinite 360* ALL NITE – Trim Dressing -473ml appeared first on Autopia.