Detailing Kingdom Car Hydra – 500ml
Car Hydra is a car shampoo which is paint-work friendly and is suitable for all car paint surfaces. It’s unique concentrated formula is not only effective at removing dirt and contaminants but Car Hydra also contains wax to leave the surface protected whist washing aswell.  Car Hydra is PH Neutral and natural wax assures total safety to the user. Car Hydra may be diluted and used as a clay bar lubricant aswell.

Car Hydra is a double action shampoo, highly concentrated and soft.  It is possible to dilute it with a ratio of 1:3. However, please take note that the effectiveness would be compromised if diluted. Please dilute according to your desired usage or preference. With the natural wax content, you would experience the enhancement of gloss effect on the car paint. Car Hydra is also soft to the hands and therefore will not cause any skin irritation.

Application:
Rinse the car thoroughly, commencing from the roof then to the lower section of the car. Ensure dust and fine sand are washed down.  Using a wash mitt and clean bucket of water (with grit guard), spray Car Hydra directly onto your wash mitt and wipe the paint surface.  We recommend washing one panel at a time starting from the top to the bottom and wiping in a linear pattern.  Once you have washed one panel, please thoroughly rinse the wash mitt in a bucket of water and repeat the process for the next panel.

The post Detailing Kingdom Car Hydra appeared first on Autopia.

Deep Black’s special formulation will not only enhance the looks and restore the colour of any rubber or plastic parts, it will also soften them if they have become stiff, leaving them not only looking great, but feeling great too.

Deep Black is very easy to use.  Ensure the intended material you are going to detail is well cleaned and dry.  Apply DB to a sponge applicator and work into the surface.  For very faded and pale surfaces, repeat application may be necessary, allow DB to be completely absorbed before applying a second coat.

The post DeDetailing Kingdom Deep Black (DB) appeared first on Autopia.

Application:
After applying compound to the polishing pads, spray Celebrate at random onto the pad.  Spraying 3 to 4 times would suffice. Prime the surface before polishing to avoid the compound from splattering.  Begin polishing the surface with low speed.  You can continue to spray at random while polishing should surface becomes dry.

The post Detailing Kingdom Celebrate Spray -500ml appeared first on Autopia.

Next Cut 3.3 has been designed to produce little to no dust and polish residue can be removed with absolute ease.  It really is quite a unique compound.

For an exhnaced finish as a one step compound on minor defects, Next Cut 3.3 can be combined with FDT or FDC.  For this, users would add 3 pea size drops of Next Cut 3.3 and 2 of FDT or FDC and polish as usual.  The finish will be extremely glossy and protected.

Next Cut 3.3 contains no silicone or fillers and is bodyshop safe

The post Detailing Kingdom Next Cut 3.3 appeared first on Autopia.

Next Cut 1.1 has been designed to produce little to no dust and polish residue can be removed with absolute ease.  It really is quite a unique compound.

For an exhnaced finish as a one step compound on minor defects, Next Cut 1.1 can be combined with FDT or FDC.  For this, users would add 4 pea size drops of Next Cut 1.1 and 2-3 of FDT or FDC and polish as usual.  The finish will be extremely glossy and protected.

Next cut 1.1 contains no silicone or fillers and is bodyshop safe

The post Detailing Kingdom Next Cut 1.1 ( Heavy Cut Compound ) appeared first on Autopia.