Show Winning wax contains no abrasives, but it fills minor imperfections to increase gloss, smoothness, and depth. Using natural carnauba wax gives you that unmistakable waxed look without the difficult installation of traditional paste waxes.

How to Use:

• Starting with a clean and dry surface, apply to the paint using a foam or microfibre applicator.
• Spread the wax in a circular motion, keeping it as thin as possible.
• Show Winning wax can also be machine applied using the DIY Detail Red Jeweling Pad.
• Allow wax to turn to a white haze, then using a plush microfibre towel, buff off haze.

Size: 473ml (16oz)

The post DIY Detail Show Winning Carnauba Wax – 473ml appeared first on Autopia.

It offers superior UV protection and a slick surface that lasts longer than traditional waxes and detail sprays. Use it on any exterior surface for a streak-free, ultra-slick shine.

The water-resistant and debris-repelling properties of this Envie Detail Spray make maintenance simple by minimizing dirt buildup and enabling effortless cleaning. Ideal for anyone looking to achieve professional results with minimal effort.

Directions:

Quick Detailer:

Mist Envie onto the vehicle surface. Wipe with a clean, dry plush microfiber towel, buff the product for a streak-free, glossy finish.

Drying Aid:

After the vehicle has been rinsed and is still wet, lightly mist detail spray into your drying towel and onto the intended surface. Using a drying towel to create a protected streak-free shine.

The post DIY Detail – Envie Ceramic Detail Spray – 473ml appeared first on Autopia.

Discover unmatched shine, protection, and longevity for your vehicle. This advanced coating combines graphene and ceramic technology to deliver superior results.

Hydrophobic Properties and Enhanced Contact Angle: Defy water spots and effortlessly repel dirt with the 3-Year Graphene Coating. Its strong bond and enhanced contact angle ensure exceptional hydrophobic properties.

Fully Cured for Lasting Performance: Enjoy enduring durability in varying temperature and humidity conditions. The 3-Year Graphene Coating fully cures to provide long-lasting protection.

Paint Correction for Optimal Results: Prioritize surface preparation with our clay bar and high-quality microfiber towels for optimal results when applying the coating.

Professional-Grade Quality for DIY Enthusiasts: Achieve professional-level results with ease. The 3-Year Graphene Coating is designed for both professional detailers and DIY enthusiasts.

Up to Three Years of Protection: Experience long-lasting defence against the elements. Our coating provides up to three years of reliable protection.

Bonded to Surfaces for a Semi-Permanent Solution: The 3-Year Graphene Coating forms a strong bond with surfaces, offering a reliable and semi-permanent protective barrier.

Trusted by Professional Detailers: Our coating is a preferred choice for industry experts who demand exceptional performance.

Elevate your car care routine with DIY Detail’s 3-Year Graphene Coating.

Graphene Coating vs Ceramic Coating

Graphene coating offers exceptional conductivity, strength, and flexibility, making it ideal for applications requiring high performance. Ceramic coating, on the other hand, provides excellent heat resistance, corrosion protection, and durability. Both coatings have unique properties that make them suitable for different purposes in various industries.

How To Apply

–         Start with a clean and dry surface.

–         Wipe down with DIY Detail panel prep.

–         Wearing gloves, in a well-ventilated area, apply several drops to the applicator pad.

–         Working in a circular motion apply the DIY Detail Ceramic Coating to a small area (a front fender for example).

–         Allow to dwell 2-5 minutes (dwell time is dependent on temperature and humidity).

–         Observe the surface, as the coating begins to cross-link to the paint, the coating will transition from a liquid to what looks like an oil slick on water.

–         When 50% of the surface turns back to clear, start levelling the coating.

–         With a short nap towel, lightly wipe the surface, if the towel is dragging, or is getting wet, wait 1 min more.

–         Once the coating is levelled, use a plush towel to buff and remove high spots.

Size: 30ml (1oz)

The post DIY Detail – 3 Year Graphene Coating – 30ml appeared first on Autopia.

Unparalleled protection and durability for your vehicle. This professional-grade product is trusted by expert detailers for exceptional results.

Shield against harmful UV rays: Defend your vehicle’s paint from sun damage with our long-lasting ceramic coating.

Professional application for optimal performance: Ensure precise and effective application for maximum paint protection.

Nano ceramic coating technology: Harness the power of nanotechnology for superior protection against water spots and contaminants.

Unlock the benefits of ceramic coating: Experience enhanced paint protection, easy maintenance, and longevity for your vehicle.

Perfectly paired with paint correction: Optimize results by combining our ceramic coating with comprehensive surface preparation.

Premium ceramic coating products: Trust our formulations for professional-grade performance and safeguard your car’s paint.

Hydrophobic properties for easy maintenance: Effortlessly repel water, dirt, and debris, keeping your vehicle looking pristine.

Professional-grade durability: Our ceramic coating withstands the elements and provides long-lasting protection.

Defend against bird droppings and contaminants: Prevent permanent damage to your vehicle’s paint with our reliable ceramic coating.

Superior paint protection: Preserve the gloss and finish of your car’s exterior with our 5 Year Ceramic Coating.

Experience the long-lasting power of ceramic coating: Choose DIY Detail’s 5-Year Ceramic Coating for unmatched protection.

Note: Please apply in a well-ventilated and wear a mask if needed. 

How To Apply

–         Start with a clean and dry surface.

–         Wipe down with DIY Detail panel prep.

–         Wearing gloves, in a well-ventilated area, apply several drops to the applicator pad.

–         Working in a circular motion apply the DIY Detail Ceramic Coating to a small area (a front fender for example).

–         Allow to dwell 2-5 minutes (dwell time is dependent on temperature and humidity).

–         Observe the surface, as the coating begins to cross link to the paint, the coating will transition from a liquid to what looks like an oil slick on water.

–         When 50% of the surface turns back to clear, start levelling the coating.

–         With a short nap towel, lightly wipe the surface, if the towel is dragging, or is getting wet, wait 1 min more.

–         Once the coating is levelled, use a plush towel to buff and remove high spots.

Size: 30ml (1oz)

The post DIY Detail – 5 Year Ceramic Coating – 30ml appeared first on Autopia.

If your trim isn’t looking factory fresh, DIY Detail Trim Restore and Protect will return it to better than new condition. Using advanced whetting technology DIY Detail Trim Restore and Protect revitalizes your trim, adding a black dye to give it the dark look you desire.

Adding long lasting ceramic protection your coating will enjoy long term protection to keep its new found youthful appearance.

Size: 30ml (1oz)

The post DIY Detail Trim Restore & Protect – 30ml appeared first on Autopia.

This non-greasy, streak-free car interior cleaner formula provides UV-Protection to help prevent cracking and fading on hard plastics without the oily feel or look being left behind.

Interior Clean & Protect is the easiest way to maintain, clean and condition your vehicle’s interior surfaces. This car interior protectant spray is a jack-of-all trades and can clean every single surface inside your car from the dashboard to glass, plastic, vinyl, and more.

Directions:

For the best results, spray the interior car cleaning product onto a clean microfibre cloth or towel to avoid overspray. Wipe interior surface evenly with a microfibre cloth, repeat until your vehicle’s interior surfaces are clean and dressed. Wipe away any excess product or buff to reduce shine.

Size: 473ml (16oz)

The post DIY Detail Interior Clean & Protect – 473ml appeared first on Autopia.

DIY Detail’s Quick Beads is an easy-to-apply, high-performing Graphene infused paint protection. Quick Beads offers industry-leading durability and longevity in a DIY coating making it the perfect product for daily drivers as it protects your vehicle from road debris, dust, and other contaminants. Keep your vehicle safe from water spotting, etching, and scratching when washing your car.

Quick Beads can be lightly sprayed onto a clean wet surface, then activated with a garden hose or pressure washer to produce a deep gloss and solid protection. Quick Beads not only gives you a slick UV-resistant coating but is also incredibly fun to apply.

Directions: 

• Wash the vehicle then spray Quick Beads onto the wet surface. 
• Spray Quick Beads over the entire exterior surface of the vehicle.
• Let Quick Beads dwell on the exterior of the vehicle for 30 seconds.
• Rinse off the entire vehicle.
• Dry off the vehicle with a premium drying towel. Starting with the glass first.

The post DIY Detail Quick Beads – 473ml appeared first on Autopia.

Bonded iron can be a huge problem if it embeds itself into the surface of your vehicle. When Iron Remover is applied to your vehicle’s paint it instantly loosens up iron oxide particles allowing you to easily rinse them off, keeping your car looking its best for years to come.

Iron Remover is a PH neutral formula meaning it is safe to use on all painted surfaces including wheels. We recommend testing an inconspicuous area on your vehicle before applying it to the entire surface, however.

Before decontaminating your vehicle’s paint, it is best to remove dirt and debris by giving it a thorough wash. We offer many other products to assist you in this important step.

Details:

• Removes years’ worth of contaminants
• Works on contact
• Keeps white vehicles clean

Directions: 

Spray Iron Remover directly onto a cool surface (wheel or paint) and allow to dwell for 3-8 minutes. Lightly agitate, if necessary, any ferrous particles will dissolve, forming a purple solution. Do not allow the product to dry on the surface. Rinse the product off the surface.

For Best Results: 

Use in a well-ventilated area out of direct sunlight as the product has a powerful and unpleasant odour.

The post DIY Detail Iron Remover – 473ml appeared first on Autopia.

Step 1: Spray Panel Prep Spray on the contaminated surface of your car.

Step 2: Wipe the surface with a clean microfiber towel until all of the spray and dirt is completely removed.

Step 3: Your surface is clean and now ready for ceramic coating protection.

The post DIY Detail Panel Prep – 473ml appeared first on Autopia.

Are you looking for an eco-friendly way to wash your car, without using a traditional car wash soap and facing water restrictions? Rinseless Wash aids in the conservation of gallons of water. A great time saver, DIY Detail Rinseless Wash is one of the most water-wise ways of keeping your prized ride clean. When you’re done with the wash process, there is no need to rinse it! Simply wipe down your car panel at a time and enjoy the shine!

Directions:

Hand Washing:

Add 1 oz of Rinseless Wash to 2 gallons of water in a bucket or rinse bucket. Soak a plush wash mitt or towel in the bucket and wash one panel at a time using straight lines until clean. For a vehicle with PPF or ceramic coated surfaces, this gentle wash solution ensures optimal cleaning without compromising the protective layers. Dry each panel using a clean plush microfiber towel.

Foam Cannon:

Add 4-5 ounces of Rinseless Wash to your foam gun/cannon and fill with water. Spray the car, then use a wash mitt soaked in a rinseless solution bucket and clean each panel at a time in straight lines. This method is particularly effective when dealing with a larger vehicle or when using a foam cannon in conjunction with a pressure washer.

For best results, apply the rinseless wash to a semi-clean cool surface.

The rinseless wash’s unique formulation helps provide a lubricating effect, reducing the chances of scratches during the wash process. Additionally, it eliminates the need for a separate drying process, saving you time and effort.

By using DIY Detail Rinseless Wash, you not only achieve a spotless and glossy finish but also contribute to water conservation efforts while adhering to water restrictions.

The post DIY Detail Rinseless Wash – 473ml appeared first on Autopia.