This degreaser can be used at a variety of dilutions depending on the job. It can be used at full strength to tackle tasks such as engine degreasing, or it can be diluted for cleaning areas such as wheels and tyres.

P&S Hot Shot High Powered Degreaser is made with high-efficiency, biodegradable detergents and solvents to ensure exceptional results.

Engine bays are particularly difficult to clean due to grease, congealed oil and thick grime gathering. P&S Hot Shot High Powered Degreaser is extraordinarily high-powered and capable of handling the toughest of cleaning job on contact.

P&S Hot Shot High Powered Degreaser is extremely potent and will often be able to eliminate 99% of build-up on contact alone. For heavily soiled areas some light brushing may be required.

Directions:

It is recommended that you do a small test spot on an inconspicuous area to ensure you get your desired results. Use P&S Hot Shot High Powered Degreaser undiluted for engine bay cleaning or diluted 15:1 for use on wheel and wheel wells. Spray P&S Hot Shot High Powered Degreaser onto the surface, scrub if necessary, give P&S Hot Shot High Powered Degreaser time to work, rinse off thoroughly.

The post P&S Hot Shot High Powered Degreaser 128oz 3.78L appeared first on Autopia.

This enzyme and stain remover was formulated using extremely effective enzymes that cut through soils, dirt, proteins, and grease in minutes.

Protein stains are just as unavoidable as every other type of stain and spot, but they have the added misfortune of bringing an atrocious scent along with them. This is exactly why Terminator contains a fresh scent and deodoriser to not only remove the stain, but also make sure its smell doesn’t linger afterwards.

Terminator is Step 1 in the P&S Interior Cleaning Process. Along with Carpet Bomber (Step 2) and Finisher Peroxide Treatment (Step 3). It can also be used as a standalone product.

Directions:

P&S Terminator Enzyme Spot & Stain Remover is a ready to use product, there is no dilution required. It is recommended that the interior is vacuumed and brushed before application. Apply Terminator directly onto the stain/spot initially and then treat the entire area. Allow the product to work for about 3 minutes agitating the surface with a carpet brush. Once completed, vacuum the carpet and upholstery.

The post Share P&S Terminator Enzyme Spot & Stain Remover (16oz) appeared first on Autopia.

Carpet Bomber is formulated using biodegradable cleaners and water-based solvents to safely clean your carpet and upholstery.

This Carpet & Upholstery Cleaner also uses all-natural citrus derivatives combined with the biodegradable cleaners and water-based solvents to dissolve grease and lift dirt.

Not only does Carpet Bomber remove dirt and stains, it is formulated with a deodorising agent to remove odours along with stains.

Carpet Bomber is Step 2 in the P&S Interior Cleaning Process. Along with Terminator Enzyme Spot & Stain Remover (Step 1) and Finisher Peroxide Treatment (Step 3). It can also be used as a standalone product.

Directions:

Dilute Carpet Bomber Carpet & Upholstery Cleaner with water depending on the strength needed. Before application, dry brush and vacuum the carpet and upholstery. Apply a light mist to the area you are working on. Allow the product to sit for 3 minutes while using a carpet brush to agitate. Once you are finished, vacuum the carpet and upholstery.

The post P&S Carpet Bomber Carpet & Upholstery Cleaner appeared first on Autopia.

Use RAGS TO RICHES™ to soften, brighten and bring new life to all your favorite quality microfiber products!

Formulated for use with all residential and commercial washing machines, including HE. Safe on all textile types including Microfiber, Cotton, Chamois, and other Fabric Blends.

• For small or lightly soiled loads use 1 ounce.
• For large loads use 2 ounces.
• Pre-soak heavily soiled and/or hydrophobic towels in a bucket of water mixed with 1-2 ounces of RAGS TO RICHES™ prior to washing.
• For best results, wash with Warm Water and dry on a Low Heat setting or hang to dry.
• Do NOT use with fabric softeners and avoid mixing microfiber products with non-microfiber products.
• Enjoy your new towels!

The post P&S Rags To Riches Gallon – Microfibre Wash appeared first on Autopia.

It contains lubricants and cleaning agents to carefully remove dirt from your car without having to use water. This is great if you live in an apartment complex or there is a water shortage.

Epic Waterless Wash cleans, shines and protects your car in one step. It provides extreme gloss in an instant.

For the best results just spray it on a wet or dry surface and wipe it off.

The post P&S Epic Waterless Wash – 16 oz appeared first on Autopia.

This product was developed for the McCall Detailing Team during Monterey Car Week to add mouth-watering amounts of gloss to the vehicles.

Dream Maker uses the latest in Gloss Technology to amplify the gloss of single stage and clear coated paint.

It is safe to use on all existing protection including P&S Bead Maker and even ceramic coatings. Dream Maker continues to improve the look and feel of glossy surfaces.

This gloss amplifier is ideal for show cars and every day drivers that you want to stand out from the crowd.

Directions:

Dream Maker should be applied to a freshly washed vehicle that is free of major contaminants. Clay the vehicle if necessary.

For Dry Paint applications, mist 1-2 sprays per panel and immediately work the product in with a microfibre towel. Flip the towel as needed to level the product.

For use as a drying aid, apply 1-2 sprays per panel and work the product in with your favourite drying towel.

The post P&S Dream Maker Gloss Amplifier – 16 oz appeared first on Autopia.

Bug residue usually becomes an issue in the warmer months, especially when driving on the motorway. Insects often end up stuck to the front bumper.

Insect residue can be extremely damaging to paintwork. The residue is so acidic that it can eat away at clearcoats within days. If left on the paintwork the bug remains will etch into your clearcoat and leave noticeable marks that look similar to water spots.

P&S Bug Off Insect Remover will quickly break down all residue left behind on the paint and neutralize the acids that will eat away at your clear coat.

Directions:

Always wear protective gloves, goggles, and clothing when using any strong cleaner. Pour the product into an empty spray bottle. Make sure that the paint surface is cool to the touch to avoid any issues with spotting on the paint. Spray P&S Bug Off Insect Remover directly onto the affected area. Let P&S Bug Off Insect Remover sit on the paint and clean the surface for about 1-2 minutes. Then simply rinse P&S Bug Off Insect Remover off your paint and wash your vehicle.

The post P&S Bug Off Insect Remover- Bug Remover appeared first on Autopia.

P&S Play Maker All-in-One Polish & Protectant gives anybody, whether you are a professional or an enthusiast, the ability to correct, perfect, and protect their paint in one easy step! The micro-abrasives in P&S Play Maker All-in-One Polish & Protectant allow it to correct light to moderate imperfections in your paint, then polish out to a glossy finish. Once it is done correcting your paint, P&S Play Maker All-in-One Polish & Protectant will then leave behind a layer of protection to ensure your paint retains the perfection you just achieved!

The fact that you are on this website right now proves that you are the types of person that cares about the condition of their car’s paint. The issue that we are sure you are having is with the process necessary to achieve those results. Even if you are the kind of person that also enjoys the process, being able to cut the time it takes down is probably still something that appeals to you. Well, P&S Play Maker All-in-One Polish & Protectant is a product that is bound to save you TONS of time without compromising the results!

P&S Play Maker All-in-One Polish & Protectant will complete an entire 3-step detailing process in just one step! The genius formula of P&S Play Maker All-in-One Polish & Protectant contains professional level micro-abrasives that give it the incredible ability to correct moderate paint imperfection and polish out to a glossy shine. Once the micro-abrasives have done their job, the rest of the formula of P&S Play Maker All-in-One Polish & Protectant will take over, leaving behind a durable layer of protection! Now your paint is polished, cleaned, and protected, all in one step thanks to P&S Play Maker All-in-One Polish & Protectant!

P&S Play Maker All-in-One Polish & Protectant is applied using a foam polishing pad or an all-in-one foam pad. Once the surface has been thoroughly polished, buff away the excess product to reveal a clean, polished, and protected surface!

If you are a professional detailer, minimizing the time it takes for you to detail a car’s paint is crucial. While P&S Play Maker All-in-One Polish & Protectant will already save you a ton of time by greatly reducing the amount of time it takes to detail a car, that is not all it will offer the profession who uses it. P&S Play Maker All-in-One Polish & Protectant will also make the clean-up much more efficient and hassle-free. This is thanks to the dust-free nature of P&S Play Maker All-in-One Polish & Protectant. Without any worry about having to waste time wiping up all the dust that many other all-in-ones produce, you will save even more time and hassle during your average detailing job!

Many people think that having perfect paint means owning an expensive machine polisher as well. While that is true for a lot of products on the market today, that is not the case for P&S Play Maker All-in-One Polish & Protectant. This amazing formula can be used both by machine AND by hand. Just one more reason that P&S Play Maker All-in-One Polish & Protectant is the perfect product for both the professional AND the enthusiast!

Directions for use:
1. Wash the entire vehicle prior to beginning the polishing process. If necessary, clay the surface of the paint.
2. Select your desired tool and pad combination for polishing.
3. Apply a small amount of P&S Play Maker All-in-One Polish & Protectant to the paint surface or the pad and begin the paint correction process. Use light to medium pressure to product a bright finish. Work a 2’ x 2’ area or smaller and apply sufficient product to lubricate and provide sufficient cleaning.
4. Take your time and repeat the process over the entire paint surface. Inspect paint thoroughly to make sure optimal results have been achieved and polish to a bright finish using a quality microfiber towel.

32 oz.

The post P&S Play Maker All-in-One Polish & Protectant – 946ml appeared first on Autopia.

P&S Ultracoat Paint Sealant is an exceptionally long-lasting sealant made of high-quality urethane and polymers that are designed to provide durable protection and a high gloss finish to your paint for months! Your paint will love the incredible amount of protection offered by P&S Ultracoat Paint Sealant, while you will love the extraordinary wet, glossy finish it provides!

During the 50+ years that P&S has been in business, they have continuously created and innovated new products that make waves in the detailing product industry! P&S has proven time and time again that they are certainly deserving of their reputation as one of the oldest and best car detailing product manufactures in the industry. P&S Ultracoat Paint Sealant alone should be enough to convince even the most skeptical detailer of this fact.

Paint finishes are one of the most popular aspects of discussion in the car detailing community. For years, carnauba waxes were regarded as the best of the best when it came to the protection and look of a finished car. That entire mindset changed when synthetic, polymer paint sealants became well-known. Synthetic waxes (often referred to as “paint sealants”) are able to offer much longer lasting protection than their natural-ingredient based counter parts while still providing the same glossy finish. P&S Ultracoat Paint Sealant is no exception to this rule! P&S Ultracoat Paint Sealant is fortified with polymer and urethane sealants that will ensure your vehicle receives a flawless finish and incredibly long-lasting protection!

Directions: Be sure to wash and dry your vehicle before applying P&S Ultracoat Paint Sealant. Any paint correction or decontamination needs to be done before applying P&S Ultracoat Paint Sealant. Once your paint is prepped, apply P&S Ultracoat Paint Sealant either by hand using a foam wax applicator or by machine using a foam finishing pad. Allow the product to dry before using a soft microfiber towel to buff the product off the paint. Allow P&S Ultracoat Paint Sealant 4-6 hours to cure before exposing it to moisture of contamination.

32 oz.

The post P&S Ultracoat Paint Sealant – 946ml appeared first on Autopia.

P&S Ultracoat Polish Clearcoat Finishing Polish is an exceptional polish that repairs light to moderate damage on your paint’s surface in one easy step! P&S Ultracoat Polish Clearcoat Finishing Polish contains light cleaners and sealants that work with the clear coat on your car to restore your paint to glossy, flawless finish. Best of all, P&S Ultracoat Polish Clearcoat Finishing Polish can be applied either with machine, or by hand!

P&S has been in the detailing products business for over 50 years, so to say they know what they’re doing when it comes to finishing polishes is a bit of an understatement. Their products are used around the world by both professional detailers and DIYers alike, so you can bet that P&S Ultracoat Polish Clearcoat Finishing Polish is made by a company that is more than capable of creating quality products.

Standard paint correction process can take hours or even days to complete. These processes tend to include a compounding step, a polishing step, and a finishing polish step. Having to buff the entirety of your car 3 times can take an excruciatingly long amount of time. That is why the convenience of being able to condense all 3 of those step into 1 single step with P&S Ultracoat Polish Clearcoat Finishing Polish is so incredible! P&S Ultracoat Polish Clearcoat Finishing Polish does this by using specially formulated cleaners and polymer sealants that work with today’s urethane clearcoat paints to easily correct and perfect your vehicle’s paint.

P&S Ultracoat Polish Clearcoat Finishing Polish is also able to be applied either by hand or machine! Products that can provide the results P&S Ultracoat Polish Clearcoat Finishing Polish provides while having this amount of flexibility are few and far between. Whether you want to correct the entirety of your car’s paint quickly using your favorite rotary/dual action polisher or just want to touch up a small spot on your paint by hand, P&S Ultracoat Polish Clearcoat Finishing Polish is a great choice!

Applying P&S Ultracoat Polish Clearcoat Finishing Polish with a machine:
Use your preferred machine polisher/buffer with your favorite finishing pad. Apply enough P&S Ultracoat Polish Clearcoat Finishing Polish to the pad ensure proper lubricity and correcting capabilities. Apply P&S Ultracoat Polish Clearcoat Finishing Polish in 2’ x 2’ sections using a medium speed until it dissipates, leaving a smooth finish. Repeat over the entirety of the paint surface.

Applying P&S Ultracoat Polish Clearcoat Finishing Polish by hand:
Apply P&S Ultracoat Polish Clearcoat Finishing Polish using a soft, clean towel. Rub P&S Ultracoat Polish Clearcoat Finishing Polish on the surface while it is wet to remove paints defects and allow it to dry. Remove with a clean, soft towel.

16 oz.

The post P&S Ultracoat Polish Clearcoat Finishing Polish 473ml appeared first on Autopia.