The BONNET LIGHT provides you with an extremely bright and powerful illumination of the entire engine bay.

Compared to the previous model, the light output of LINE LIGHT BONNET C+R has been increased from 1000 lumen to 1400 lumen.

Supplied with an adjustable telescopic holder with soft-padded hook ends providing a firm and scratch-free grip on the vehicle. The holder is compact and takes up less space in storage.

Without cable the bonnet light might also be used as a large inspection lamp. Inside the cabin the BONNET LIGHT may also be used as work light either mounted by the telescopic holder or mounted onto the windscreen by the flexible arm with suction cup.

LINE LIGHT BONNET C+R is made in Denmark.

Additional accessories available to position the lamp all places on or beneath the car.

Five benefits with Bonnet Light C+R:

• Light output (1400 lumen) increased by 40%
• Dust and waterproof, IP65
• Choose between 2 light settings (50% or 100%) for maximized operating time
• New magnetic, electronic switch
• Extremely low weight, only 1000g incl holder

03.5240UK.A

The post ScanGrip Bonnet / Interior 1m Cube Light C+R – NEW appeared first on Autopia.

This COB LED headlamp is designed for the professional user who wants a basic ultralight headlamp that is easy to operate and applicable for all kinds of working tasks.

HEAD LITE S is supplied with a stepless dimmer function in the range of 10 % to 100 % providing up to 140 lumen. This enables you to adjust the light output to the specific work task and thereby obtain an operating time up to 10 hours.

HEAD LITE S is very compact and lightweight, and the lamp head can easily be adjusted to obtain the optimum work lighting angle. The elastic headband is also very comfortable and adjustable.

The headlamp is delivered without batteries, use 2 x AAA 1.5V.

Why choose HEAD LITE S?

• Ultralight headlamp providing up to 140 lumen
• With an operating time up to 10 hours you can use the headlamp throughout your entire workday
• The stepless dimmer function enables you to adjust the light output from 10 % to 100 %
• Easy to operate and applicable for all kinds of working tasks
• A compact and lightweight professional headlamp that accommodates your basic needs

HEAD LITE S is tested according to the ANSI/NEMA FL1 standard

// The design of HEAD LITE S is unique and covered by EU design patent RCD No 4070035.

The post ScanGrip Head Lite S appeared first on Autopia.

I-Match 3 comes with a rechargeable battery and is supplied with the newest COB LED technology, the rechargeable I-MATCH 3 headlamp provides an extremely powerful illumination spreading the uniform light to the maximum and lightens up your entire field of view.

Highlights

• Rechargeable headlamp that lightens up your entire field of view
• ALL DAYLIGHT function with 5 colour temperatures
• Featuring sensor mode making it easy to switch on/off the light
• Stepless dimmer function in the range from 10% to 100%
• Dust and waterproof, IP65
• Low weight of only 100g

Compared to the previous model, the new I-MATCH 3 features ALL DAYLIGHT function, offering 5 different colour temperatures depending on the type of job to be carried out. It also has a stepless dimmer function, enabling you to easily adjust the light output in the range from 10% to 100%. It has been upgraded from 160 lumen to 250 lumen and is the ultimate tool providing hands-free illumination for any detailing or colour match job.

In sensor mode, the light can easily be switched on/off by waving your hand in front of the lamp – even if you are wearing gloves.

The I-MATCH 3 headlamp is provided with the very newest rechargeable battery technology and as optional accessory, the Sangrip Powerbank can be used for increased operating time. Simply attach the powerbank to the head band via the enclosed flexible clip holder and connect the cable to the headlamp.

The robust and sleek I-MATCH 3 is both dust and waterproof (IP65) with a remarkably low weight of only 100g.

CRI+ for accurate colour matching

With our lighting solutions for the painting industry, we’re making use of the CRI+ term defined as an average of all 15 R-values. This is the only correct definition of the CRI value to be used for accurate and reliable colour recognition.

The post Scangrip I-Match 3 Headlamp appeared first on Autopia.

The lamp is easy to carry in the pocket or in the work belt with the built-in clip, ready at hand for quality check between prep-zone operations. Supplied with a two-step operating option: Step 1 = 100%, step 2 = 50% light output.

Place the lamp anywhere you want during inspection with the turnable sturdy hook or the strong built-in magnet. The flexible lamp head tilts up to 180 degrees.

The post Scangrip Mini Match Lighting appeared first on Autopia.

The SUNMATCH 3 is supplied with a two-step operating option:

Step 1 = 100% light output
Step 2 = 50% light output

SUNMATCH 3 is always ready to use and easy to find when placed in its charging base after each job. Place the lamp anywhere you want during inspection with the turnable sturdy hook or the strong built-in magnet. The flexible lamp head tilts up to 180 degrees.

The post Scangrip Sunmatch 3 appeared first on Autopia.

LED pen light with ultra high CRI (colour rendering index) LED. Perfect for spot colour matching.

Scangrip MATCHPEN has a built-in focus function in the lens providing a beam angle between 10 and 70 degrees.

The lens can be unmounted for easy cleaning after use in dirty and greasy environments.

Technical Specifications:

• Ultra high CRI LED
• 95 CRI
• 4000 KELVIN
• 300-4000 lux
• 100 lumens
• 10°-70° beam angle
• 2h operating time
• 2 X AAA/1.5V Alkaline
• IP54

The post Scangrip Match Pen appeared first on Autopia.

The MATCHPEN R is an easy to carry penlight with excellent colour rendering properties for colour match always readily available in a shirt or pant pocket. Designed for inspection in the workshop and especially useful for detection of scratches, pinholes and swirl marks.

MATCHPEN R features a 2 COLOUR LIGHT function, providing you with the option to choose between 2 different colour temperatures depending on the job at hand.

The post Scangrip Matchpen R appeared first on Autopia.

The SCANGRIP Dual Light Bracket can be mounted on a SCANGRIP Wheel Stand or Tripod and will hold two SCANGRIP Multimatch 2, 3 & 8 or D-Match 2 professional work lights.

When detailing a car, there’s no such thing as too much light! The Dual-Light Bracket allows you to double the lighting capacity to provide high-intensity lighting just where you need it!

Fits onto:

• SCANGRIP Wheel Stand
• SCANGRIP Tripod

For use with:

• D-Match 2
• Multimatch 2
• Multimatch 3
• Multimatch 8

The post Scangrip Tripod Dual Bracket appeared first on Autopia.

MOVE THE LIGHTING AS YOU NEED TO.

When performing paint correction on a vehicle, lighting needs to be exactly right in order to show the true condition of the paint while you work. As such, mounting high-intensity lighting onto a moveable stand allows you to roll the lights into the position you require as you move around the vehicle.

The SCANGRIP Wheel Stand is designed to be used with a SCANGRIP Multimatch 2, 3 or 8 light or two (if using the Dual Light Bracket). In addition to being instantly portable, the Wheel Stand extends from 0.7m up to 1.9m so you can always position the light exactly at the height you need it.

Features & Benefits:

• Wheels allow lights to be moved around the vehicle as you work
• Extendable from 0.7m – 1.9m (2’3″ – 6’2″)
• Stable construction – safe even when fully loaded & extended
• Sturdy wheels roll easily even over uneven surfaces
• Locks to clamp wheels in place
• Powder-coated steel for corrosion resistance
• Can be used indoors or outdoors

Technical Specification:

• Max load: 10kg
• Weight: 6kg
• Construction: powder coated steel

The post Scangrip Wheel Stand appeared first on Autopia.

The SCANGRIP Tripod is extremely stable, perfect for mounting a single Multimatch 2, 3 or 8 lamp (or two if using the Dual Light Bracket). Extendable between 1.35m and 3m, the TRIPOD allows you to adjust the lighting to the precise height you require. The sturdy construction means the Tripod never compromises on stability, even when fully loaded and extended.

To increase safety when in use, work light cables can be stored in the safety clips placed on each of the tripods legs.

Features & Benefits:

• For mounting MULTIMATCH 2, 3 & 8 lights
• Extends from 1.35m – 3m (4’4″ – 9’8″)
• Stable even when fully extended
• Allows positioning of lighting at the required height
• Safety clips on each leg for keeping electrical cables in place

Technical Specification:

• Maximum load: 10kg
• Weight: 6kg

The post Scangrip Tripod appeared first on Autopia.