The powerful formula is intended only for use on fully cured paint, hard and chemical resistant surfaces, or similar applications.

Tips for Success:

1. Reveal Strong, spray onto a towel then wipe, do not spray directly on the surface
2. Wipe immediately with a clean, soft, microfiber polishing cloth until dry.
3. Inspect surface and repeat treatment as necessary.

The post Rupes Reveal Strong – Residue Remover 750ml appeared first on Autopia.

Properties

• For the most stubborn petroleum-based contaminants and sticky deposits
• Versatile – tar, asphalt, resin, adhesives, grease, paint transfer
• Removes adhesive residue from stickers and tapes that Tar & Glue cannot handle
• Efficiency – spot application and precise use
• Fast-acting formula reducing the need to scrub surfaces
  

  How to use

  1. Make sure the surface is clean (after pre-wash) and dry.
  2. Shake the product in the bottle.
  3. Apply a small amount of product onto a microfiber cloth.
  4. Press against the contamination and gently rub until removed / dissolved.
  5. Once finished, immediately wash the car with shampoo and rinse thoroughly with water to remove any solvent residue.

• Tips

  • Do not apply to hot surfaces and do not work in direct sunlight.
  • Do not allow the product to dry out.
  • Perform a test in an inconspicuous area.
  • Use for spot application only and avoid prolonged contact with the surface.
  • Do not apply to sensitive components (plastics, rubbers, seals) without testing in an inconspicuous area first.
  • Wear protective gloves and ensure good ventilation.

The post AUTO GRAPG – ZIRCON HEAVY DUTY REMOVER appeared first on Autopia.

Properties

• Effectively dissolves tar and asphalt.
• Removes adhesive residue from stickers and tapes.
• Safe for paint, rims and windows.
• Fast-acting formula reducing the need to scrub surfaces.

How to use

1. Shake the product in the bottle.
2. Spray the product onto a dry surface, preferably from bottom to top.
3. Leave for 1-2 minutes, not allowing it to dry out.
4. Rinse thoroughly with pressurized water or remove dirt with a microfiber cloth.
5. Repeat if necessary. Once finished, wash the car with shampoo.

Tips

• Do not apply to hot surfaces and do not work in direct sunlight.
• Do not allow the product to dry out.
• Perform a test in an inconspicuous area.
• Wear protective gloves and ensure good ventilation.

The post AUTO GRAPH – AXINITE TAR & GLUE REMOVER appeared first on Autopia.

Key Features:

• Fast Acting Iron Remover
• Powerful Formula, Dissolves Iron Deposits
• Purple Colouring, Shows Chemical Contaminate

Safe, Ph Neutral & No Bad Smell

Despite its remarkable reactivity, the pH remains stable, ensuring versatility across various applications. Plus, with its neutral pH intact, it’s safe for use on even the most delicate materials. And there’s more. We’ve transformed the harsh odor of the previous version into a delightful banana candy scent, turning iron decontamination into a truly enjoyable experience.

Application Advice:

• Use after the initial wash.
• Work on a cool panel out of Direct Sunlight
• Spray Q2M iron generously onto the paint
• Allow to dwell for 1-2 minutes & rinse thoroughly

PRO TIP

Use Q²M Iron Redefined during the chemical decontamination process right before the initial wash. Always work on a cool panel and avoid direct sunlight. On hot days, work in sections and do not allow the product to dry.

TIP: Q²M Iron Redefined is extremely slippery and might be used along with a chemical resistant clay bar as a lube to speed the process up.

The post Gyeon Q2M Iron REDEFINED appeared first on Autopia.

Basic Tar Glue Remover is the go-to solution for hobbyists who need to tackle stubborn tar, grease, and glue contamination on a vehicle’s exterior. Regular washing often can’t remove these bonded deposits, which is why this product is essential for deep decontamination before paint correction or applying protective coatings. Its strong yet surface-safe formula works on paint, rims, and glass, giving you a clean foundation for the next detailing steps.

How does asphalt removal works?

This versatile cleaner penetrates and softens tough residues such as tar spots, road grime, assembly pastes, and sticker adhesive. Within minutes, it starts breaking down contaminants so they can be rinsed away without harsh scrubbing. The product’s high efficiency saves time while protecting the integrity of your paintwork. Plus, the fruity fragrance makes the process more pleasant compared to the strong chemical smell of many tar removers.

How do you use Basic Tar Glue Remover for the best results?

Always work in a shaded area on a cool, clean surface. Test on an inconspicuous spot before full application. Spray directly onto dry paint, rims, or glass, or apply with an applicator pad. Let it dwell for up to 10 minutes — but never allow it to dry. Rinse thoroughly with water, then wash with a dedicated cleaner like Swag Basic APC or a neutral shampoo.

For stubborn spots, you can soak a microfiber cloth with the product and wipe the area, spray and carefully use a plastic blade, or follow up with a clay bar for complete decontamination. Store in a cool, dry place, away from sunlight and frost, and shake well before each use.

With its powerful cleaning action, ease of use, and surface safety, Basic Tar Glue Remover is an essential step in achieving a truly spotless, contaminant-free vehicle.

The post SWAG Basic Tar & Glue Remover 500ml appeared first on Autopia.

Cleantle Industrial Degreaser – Because Grease Thinks It Runs the Place

Would you ever need Cleantle Industrial Degreaser ? You know how it goes: you wipe a greasy surface, it looks “grand enough”, and then your fingers tell you the truth. Oil, lubricant and industrial muck have one job — stay exactly where they are. And when your cleaner is too weak, you’re just giving the grime a guided tour instead of removing it. Too strong, and suddenly plastics, trims or even paint start to look worried. And once that oily film stays on the surface during washing, you’ll drag it around with anything you touch — pads, cloths, brushes — creating more marks than you started with.
What you actually need is control: something that cuts through grease without causing collateral damage.
That’s exactly where Cleantle Industrial Degreaser steps in.

What Makes Cleantle Industrial Degreaser Actually Worth Using?

This isn’t the kind of cleaner you use because “it was lying on the shelf”. This one was built for the jobs that usually make people swear: engine bays layered in oil, tractors coated in field history, trucks carrying half the motorway, wheel arches with their own ecosystem, or pads soaked in compound and polishes. And yes — when a car is so filthy that normal prewash cries, this degreaser can step in as a heavy-duty prewash too.
It uses organic solvents, not harsh petroleum ones, so it hits grime hard but stays safe for plastics and rubber. The dilution range — neat to 1:20 — gives you full control over cost and power. Add the strangely pleasant orange scent, and you’ve got a product that cleans like a brute but behaves like a gentleman.

The post CLEANTLE Industrial Degreaser – 1L appeared first on Autopia.

Cleantle Citrus Foam Prewash

Cleantle Citrus Prewash Foam is one of the newest products from Cleantle. It is a very effective and at the same time safe product for pre-washing. You can also use it as a shampoo for washing a car. The product offers very good lubrication for your wash mitt. The pH of this product is 9 as a concentrate, therefore at the recommended dilution, the pH of this product is close to neutral. Citrus Prewash Foam does not contain harmful substances such as potassium and sodium hydrides and any other substances that may cause corrosion. Even though the product offers very good cleaning properties it is safe for coatings, sealants and waxes.

How to use Cleantle Citrus Foam?

When you use a snow foam lance, dilute the product 1:20 for light soiling, and 1:10 for heavily soiled surfaces.
Apply the product directly to the dirty car and leave for 3 to 5 minutes.
After this time, rinse the car well with a pressure washer
Do not apply Citrus prewash on a hot surface and do not allow it to dry.
If you want to use this product instead of shampoo, use 50ml of foam per 10l of water.
This product can also be used from a pump-up sprayer at a dilution of 1:10 – 1:20 depending on how dirty the car is.

The post CLEANTLE Citrus Foam – 1L appeared first on Autopia.

Intensive Tar Remover will rid your car of stubborn tar spots, glue residue, pen marks, oil and fuel stains.

Intense Simplicity

Hard to remove tar specks are a thing of the past. Specially formulated Intensive Tar Remover eats away at tar spots and other exterior residues and stains without damaging your paintwork. Inside, watch as ink, chewing gum, oil and glue residue are lifted out of fabric and plastic for an interior to be proud of.

Effortlessly Fast

To quickly remove tar spots, wax, oil, fuel stains or even adhesive residues, pour some Intensive Tar Remover onto a paper towel, place it on the affected area, leave to dwell for two minutes and wipe away.

Total Car Cleaning

Safe to use externally, safe to use internally. Intensive Tar Remover can even help restore oil and grease-stained interior fabric and plastic. Simply apply to the affected area and agitate with an Interior Microfibre.

All Round Intensity

Intensive Tar Remover is designed to work equally as well on exterior textured plastic mouldings. Throw in alloys and tyres, and there’s nowhere this tar remover can’t work its magic.

Pro Tip: Use to remove polish and wax residue from rubber and plastic trim.

How to use Autoglym Intensive Tar Remover

The post Autoglym Intensive Tar Remover 500ml appeared first on Autopia.

This degreaser can be used at a variety of dilutions depending on the job. It can be used at full strength to tackle tasks such as engine degreasing, or it can be diluted for cleaning areas such as wheels and tyres.

P&S Hot Shot High Powered Degreaser is made with high-efficiency, biodegradable detergents and solvents to ensure exceptional results.

Engine bays are particularly difficult to clean due to grease, congealed oil and thick grime gathering. P&S Hot Shot High Powered Degreaser is extraordinarily high-powered and capable of handling the toughest of cleaning job on contact.

P&S Hot Shot High Powered Degreaser is extremely potent and will often be able to eliminate 99% of build-up on contact alone. For heavily soiled areas some light brushing may be required.

Directions:

It is recommended that you do a small test spot on an inconspicuous area to ensure you get your desired results. Use P&S Hot Shot High Powered Degreaser undiluted for engine bay cleaning or diluted 15:1 for use on wheel and wheel wells. Spray P&S Hot Shot High Powered Degreaser onto the surface, scrub if necessary, give P&S Hot Shot High Powered Degreaser time to work, rinse off thoroughly.

The post P&S Hot Shot High Powered Degreaser 128oz 3.78L appeared first on Autopia.

The post Fictech B100 – ENZYMATIC PRE-WASH 1L appeared first on Autopia.