Properties

• Alkaline pH – high cleaning effectiveness
• Removes old dressings and greasy contaminants
• Safe for painted and coated wheels
• Produces visible foam for easier application
• Ready to use (can be diluted for lighter soiling

How to use

1. Spray onto a pre-wetted tyre or dry wheel rim.
2. Leave for 30–60 seconds to allow the product to take effect.
3. Agitate with a brush or detailing brush.
4. Rinse thoroughly with pressurized water.
5. Repeat if necessary.

Tips

• Do not apply to hot surfaces.
• Do not allow the product to dry.
• Choose cleaning accessories appropriate to the surface type.
• For routine cleaning of rims and tires, a 1:1 – 1:3 dilution can be used.

The post AUTO GRAPH – OLIVINE TIRE & WHEEL CLEANER appeared first on Autopia.

This pleasantly scented, non-acidic formula is designed for alloy wheels and wheel trims, effectively breaking down stubborn brake dust, road grime, and contaminants without damaging sensitive surfaces such as centre caps or plastics.

Highly dilutable, Angelwax BILBERRY offers excellent versatility — allowing you to adjust strength depending on the level of contamination, from maintenance cleans to heavily soiled wheels.

Engineered for both performance and safety, this advanced wheel cleaner provides a thorough clean while maintaining the integrity and finish of your wheels.

For enhanced protection and a professional finish, follow up with Angelwax Bilberry Wheel Wax after cleaning.

The post Angelwax BILBERRY – Concentrated Wheel Cleaner appeared first on Autopia.

Armour For Your Wheels

R-EVOLVE X is a specialized high solids ceramic coating based on a ceramic polymer technology. The chemical composition contains individual silicon ceramic base molecules. As the carrier solvent evaporates and the deposited film is exposed to moisture, the individual molecules begin to transform such that the temporary bond to the surface is converted to a permanent, covalent bond whilst the individual base molecules interlink to form a cross-linked network. The final chemical composition of the cured R-EVOLVE X coating is a silicon/nitrogen hybrid which has many similarities to silicon nitride ceramic, a material used by NASA for the construction of rocket engine nozzles. When fully cured, R-EVOLVE has the following attributes:

-it is extremely hard providing excellent scratch resistance

-it has a low co-efficient of drag, meaning that abrasive particles are inclined to slide over the film, rather than catch and mark and cause marring

-Strong hydrophobic behaviour which inhibits the bonding of contamination and soiling

-Exceptional resistance to heat. In practice, heat will only act to strengthen the cross-linkednetwork

-Extreme chemical resistance, more so than the underlying surface.

Instructions for use:

Release cap slowly.

Apply to small areas at a time in light even strokes with suitable lint free applicator. It is important not to over apply and spread out any excess product. R-EVOLVE will become tacky asit dries.

Once the area worked upon is complete you may now buff clear any excess product and check for streaks before a final buff with a clean microfibre cloth.

This must be done within 10 minutes of finishing the application.

You may also apply R-EVOLVE X by Airbrush or Mini HVLP gun for a thicker film build and more enhanced protection. There should be no need to buff away excess product using this method unless it is over applied .The product will be fully weatherproof within 6 hours of application and continue to cure for a  period of up to 30 days dependant on weather conditions. Any errors in application should be corrected within 5 minutes to avoid the natural repellence inhibiting the application of further product. Expected coverage is approximately 5ml per wheel but will vary depending on design etc..

PRE ORDER NOW – ETA END NOVEMBER

The post R-EVOLVE X Ceramic Wheel Coating appeared first on Autopia.

BRAKE X is a powerful, non-acidic wheel cleaner formulated to tackle heavy brake dust, road grime and stubborn contamination with ease. Its high-strength concentrated formula allows dilution between 1:1 on extremely soiled wheels & between 5:1 & 10:1 for maintenance wash  depending on the level of dirt, making it both economical and versatile.

Perfect for routine maintenance cleans as well as full valeting jobs, BRAKE X delivers reliable performance without the harshness of acid-based cleaners.

⚠️ Do not use on polished aluminium, bare metal, or delicate/sensitive finishes.   

Key Features

• Supplied in a 1L, 5L & 20L

• Non-acidic, safe and effective formula

• Highly concentrated

• Removes brake dust, road film and stubborn grime

• Suitable for general valeting and maintenance cleaning

• Not suitable for polished, uncoated, or sensitive wheel finishes

• Agitate with wheel brush

The post Autopia Black BRAKE X Wheel Cleaner – 1 Litre appeared first on Autopia.

What Is Swag LADY  TIRE DRESSING Gel+?
Swag LADY EXTERIOR PLASTIC TIRE DRESSING Gel+ is a professional-grade product for restoring and protecting plastic and rubber on your vehicle’s exterior. It’s made for detailing studios and enthusiasts who want durable protection and a clean, refined look.

Use it on tires, trim, bumpers, and other plastic components. The formula is built to resist harsh weather, UV rays, and road salt—common enemies of unprotected surfaces.

Why Use a Hydrophobic Gel Dressing?

This dressing features a polymer-rich formula that deeply penetrates surfaces and forms a transparent, hydrophobic layer. Water, dirt, and grime simply slide off. That makes cleaning easier and less frequent.

It leaves a clean, satin finish—no greasy feel, no fake shine. The product also enhances color depth, reviving faded plastic and rubber to a like-new look.

The gel consistency offers full control during application. You can apply it by hand with a foam applicator or use a sprayer for hard-to-reach spots.

How Do You Get the Best Results?

Apply the product in a shaded area on a cool, clean surface. Shake the bottle. Add a small amount to a foam applicator. Spread an even layer on the surface.

Let it sit for 15 minutes. Wipe off any excess if needed. For dry or aged surfaces, a second coat is recommended.

Key Features:

• Hydrophobic polymer coating

• Satin, non-greasy finish

• Long-lasting protection from UV and salt

• Enhances and deepens faded surfaces

• Safe for rubber, vinyl, and plastic

• Quick, precise application

• Gel consistency with pleasant scent

• Great for pros and DIY detailers

Swag LADY  TIRE DRESSING Gel+ is the perfect choice for restoring beauty and adding lasting protection to your vehicle’s exterior.

The post SWAG LADY Tire Dressing Gel 250ml appeared first on Autopia.

SWAG ACID WHEEL CLEANER  is a professional-grade cleaner with an acidic pH, designed to tackle the toughest dirt and grime on vehicle wheels. Created for detailing studios and car care enthusiasts, is ideal for cleaning heavily soiled wheels that haven’t been maintained during long-term use.

Its highly concentrated formula, crafted with selected active ingredients, ensures exceptional cleaning performance. Swag Acid Wheel Cleaner is a key product in wheel restoration, providing effective decontamination as part of a thorough process involving manual cleaning, mechanical polishing, and protective coating application.

This cleaner is suitable for steel and aluminum wheels with painted finishes, as well as polished wheels with a clear coat. While powerful, Wheel cleaner should be tested in an inconspicuous area before use, especially on damaged or compromised surfaces, to avoid oxidation.

Key Features:

• Designed for heavily soiled wheels.
• Highly concentrated for customizable strength.
• Acidic pH for powerful cleaning.
• Removes brake dust and stubborn grime.
• Fast-acting and efficient.
• Suitable for professional and enthusiast use.
• Pleasant fruity fragrance.

Dilution Ratios:

• Routine cleaning: 1:20 (50ml per 1L of water).
• Deep cleaning: up to 1:10 (100ml per 1L of water).

How to Use Acid Wheel Cleaner

1. Preparation: Use in a shaded area on a cool surface. Do not let the product dry.
2. Application: Spray The Product  onto the wheel surface using a sprayer or brush.
3. Wait: Allow 5 minutes for the product to loosen dirt and brake dust.
4. Rinse: Pre-rinse to remove loose debris.
5. Repeat: Reapply and agitate with a detailing brush for a thorough clean.
6. Final Rinse: Rinse the wheels thoroughly with water.
7. Dry: Use microfiber towels or a blower to dry the wheels.
8. Protect: For added protection, follow up with a wheel protector like SWAG CERAMIC RELOADER.

The post SWAG Acid Wheel Cleaner – 500ml appeared first on Autopia.

Swag Alkaline Wheel Cleaner is a professional cleaner with an alkaline pH and high cleaning power. It was created for detailing studios and car care enthusiasts who are looking for an effective and safe product to remove dirt from vehicle rims caused by regular use. Swag Alkaline Wheel Cleaner has a concentrated formula based on selected active ingredients that provide an optimal cleaning effect. The product removes stubborn dirt from the wheel rims of vehicles. Its utility lies between acidic cleaners, which are used for removing long-term dirt, and products with a “bleeding” effect and a neutral pH designed to remove metallic contaminants.

Swag Alkaline Wheel Cleaner is designed for cleaning rims made of steel and aluminium with a painted finish, as well as polished rims if they are coated with clear lacquer. Thanks to its high concentration, you can individually choose the nature of the product. After selecting the concentration, test the product in an inconspicuous area. Swag Alkaline Wheel Cleanerhas all the attributes of a professional wheel cleaner, including high concentration, optimal strength, versatile action, safety for cleaned surfaces, and a fruity scent to enhance the work experience.

Key Features:

• Gel-based formula for better adhesion on wheels.
• Highly concentrated for customizable cleaning strength.
• Alkaline pH for effective grime removal.
• Removes brake dust and everyday dirt.
• Safe for painted and clear-coated surfaces.
• Suitable for professional and enthusiast use.
• Fruity scent for an enjoyable cleaning experience.

Dilution Ratios:

• Routine cleaning: 1:20 (50ml per 1L of water).
• Deep cleaning: up to 1:10 (100ml per 1L of water).

How to Use Alkaline Wheel Cleaner:

1. Preparation: Choose the desired concentration and prepare the solution accordingly.
2. Shake: Shake the bottle well before use.
3. Application: Use in a shaded area on cool surfaces. Spray or brush the product onto the wheel.
4. Wait: Allow up to 5 minutes for the product to loosen dirt.
5. Rinse: Pre-rinse to remove loose debris and minimize the risk of scratches during agitation.
6. Agitate: Reapply and use a brush to thoroughly clean the surface.
7. Final Rinse: Rinse the wheels thoroughly with water.
8. Dry: Use microfiber towels or a blower to dry the wheels.
9. Protect: Apply a wheel protector, such as SWAG CERAMIC RELOADER, for ongoing protection.

Additional Recommendations:

• Storage: Keep in a cool, dry place away from sunlight.
• Handling: Do not expose to freezing temperatures. Shake well before use.
• Caution: Test in an inconspicuous area before use on sensitive finishes.

Capacity:

• 500ml

Enhance your wheel maintenance routine with the powerful and versatile

The post SWAG Alcalic Wheel Cleaner ( Alkaline) 500ml appeared first on Autopia.

Swag Iron Fallout Remover is a ready-to-use, professional “bleeding” iron fallout remover with a gel-like consistency and balanced pH, specifically designed to remove metallic contaminants like brake dust and iron particles from wheels and car body surfaces. Created for detailing studios and car care enthusiasts, this product efficiently and safely neutralizes these contaminants, leaving the surface ready for further treatment.

The product’s gel formula allows it to adhere easily to surfaces, enhancing its ability to extract tough contaminants. The active ingredients react with metallic particles, turning them a violet colour to create the distinctive “bleeding” effect. This product is safe for use on both steel and aluminium wheels, including lacquered and polished finishes. It also has a pleasant fruity fragrance, reducing the typical odour associated with iron fallout removers.

Key Features:

• Gel Formula: Ensures better adhesion to surfaces, increasing effectiveness.
• Balanced pH: Safe for use on steel and aluminium wheels with lacquered or polished finishes.
• Bleeding Effect: Changes colour to violet, indicating the removal of metallic contaminants.
• Powerful Cleaning: Effectively removes brake dust and iron particles.
• Quick Action: Works within minutes to break down and remove contaminants.
• Versatile: Can be used on both wheels and vehicle paint for complete decontamination.
• User-Friendly: Includes a pigment to help identify application areas.
• Fruity Fragrance: Masks the typical chemical odour of iron fallout removers, making it more pleasant to use.

How to use fallout remover

Wheel Cleaning:

1. Preparation: Apply Fallout remover to cool, shaded wheels using a spray bottle.
2. Wait: Allow the product to sit for up to 10 minutes, during which the “bleeding” effect will appear.
3. Rinse: Rinse the wheels to remove the separated contaminants, reducing the risk of scratching the surface.
4. Reapply: Repeat the application if necessary.
5. Scrub: Use a brush to ensure complete cleaning of the wheels.
6. Rinse Again: Thoroughly rinse the wheels to remove all residue.
7. Dry: Dry the wheels with a microfiber towel or air blower. For protection, apply a product like SWAG Ceramic Reloader.

Paint Decontamination

1. Preparation: Spray the entire vehicle’s bodywork with a hand sprayer.
2. Wait: Allow the product to sit for up to 10 minutes to extract metallic particles.
3. Rinse: Thoroughly rinse the vehicle to remove contaminants.
4. Ready for Further Detailing: The surface is now ready for the next stage of decontamination.

The post SWAG Bloody Wheel Gel Fallout Remover – 500ml appeared first on Autopia.

Swag Basic Tire Dressing is the ideal choice for hobbyists who want their tires, trims, and exterior plastics to look fresh without a greasy or overly shiny finish. It restores depth of color, protects against fading, and keeps surfaces looking elegant for longer. The Si-polymer-based formula creates a long-lasting, hydrophobic coating that works year-round — repelling water, road salt, and dirt. Whether it’s summer sun or winter grime, your rubber and plastic parts stay protected.

About the Swag Basic Line

I’ve always been passionate about car detailing and creating products that make cleaning more effective and enjoyable. From innovative gel formulas to hydrophobic coatings, my goal has always been to deliver high quality that both professionals and enthusiasts can appreciate.

But I also know that not everyone needs advanced, specialized solutions. Many car lovers just want something simple, effective, and budget-friendly — a product they can rely on for quick results without breaking the bank.

That’s why I created the Swag Basic Line. It’s designed for hobbyists and everyday users who want straightforward, easy-to-use products at a great price. And while the formulas are simplified for accessibility, there’s still no compromise on quality. You get dependable results every time, whether you’re cleaning your car, home, or other surfaces.

The post SWAG Basic Tire Dressing 250ml appeared first on Autopia.

1. Deep, Long-Lasting Shine
Autopia Black Gleam delivers a rich, solvent bases, high-gloss finish that makes tyres and trim look freshly detailed — not dull or faded. It enhances colour and keeps that “just-treated” look for longer than average dressings.

2. Protects From UV & Environmental Damage
Our advanced formula shields rubber and plastic from harmful UV rays, oxidation and fading. That means your tyres and trims stay darker and healthier — not chalky or cracked over time.

3. Easy Application — No Mess, No Fuss
The product spreads smoothly and evenly with minimal effort. It doesn’t sling off at speed, and dries without sticky residues, making it ideal for both novices and professionals.

4. Water-Resistant & Durable Finish
Once cured, the dressing locks in moisture and repels light rain and wash water, helping reduce the need for frequent reapplication.

5. Safe on All Tyre & Trim Types
Autopia Black Gleam is formulated to be safe on all rubber, vinyl and plastic trim surfaces — no greasy wipe-offs that attract dust or dirt.

6. Enhances Overall Vehicle Appearance
A well-dressed set of tyres and clean trim instantly elevates the look of any car — from show cars to daily drives — giving a polished, showroom-ready aesthetic.

The post Autopia Black Gleam – Tyre & Trim Dressing appeared first on Autopia.