The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen.

Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint.

Cut: 6.0

Gloss: 7.0

Recommendations for use

Apply the fine polishing compound to the polishing pad (Fine Cut Pad or lambswool pad) and polish the precleaned surface with max. 2.000 rpm crosswise. The cleaning effect can be varied by means of pressure, polishing medium and rpm. At the start of the polishing process we recommend working with greater pressure at a lower speed. In the further course, reduce the pressure and polish to a high gloss at a higher speed. The remaining polish residues can be removed easily with the Profi ultrasonic cut microfibre cloth. Remove any streaks or traces of polish with Micro Cut M3.02.

Warnings

Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Protect against frost and excessive heat.

Size: 1 Litre

The post Koch-Chemie Fine Cut F6.01 Polishing Compound – 1 Litre appeared first on Autopia.

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness.

Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones.

Cut: 3,2

Gloss: 9,5

Recommendations for use

For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish with low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Warnings

Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Protect against frost and excessive heat.

Size: 1 Litre & 250ml

The post Koch-Chemie Micro Cut & Finish P3.01 – 1 Litre appeared first on Autopia.

With its extremely homogeneous abrasive grain, Heavy Cut 8.02 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof).

Cut: 8.5

Gloss: 5.0

Recommendations for use

Apply in a crosswise motion with a rotary polisher and a lambswool pad (for sanding traces of 1,500–2,500) or a polishing pad (for sanding traces of 2,500–5,000). Apply polishing compound at medium speed and with medium pressure. Polish afterwards with M3.02 Micro Cut Compound for the best possible finish.

Warnings

Shake before using.

Protect against frost and excessive heat.

Do not use on hot surfaces.

Before using, check suitability and compatibility.

Size: 1 Litre

The post Koch-Chemie Heavy Cut H8.02 – 1L appeared first on Autopia.

The post Scholl W6+ Premium Glaze Wax 1L appeared first on Autopia.

The post Scholl S20 Black Real 1-Step Compound 500g appeared first on Autopia.

The universal High Performance Compound S17+ can be used for all kind of applications on fresh painted surfaces as well as for the removal of heavily scratched and weathered paintwork. The excellent cutting performance along with the brilliant mirror gloss and a minimum of dust formation will convince you.

Thanks to the unique iPT technology (intelligent Powder Technology) deep scratches and P2000 grit sanding marks are effortlessly and quickly removed. Best suited for scratch-resistant clear coats.

The post Scholl S17+ Heavy Cut Compound 1Kg appeared first on Autopia.

The post Scholl ECOFIX E Wax Protection 1L appeared first on Autopia.

The post Scholl ECOFIX E All In One Cut & Shine 1L appeared first on Autopia.

The post Scholl ECOFIX 3000 Fine Cut 1L appeared first on Autopia.

The post Scholl ECOFIX 2000 Medium Cut 1L appeared first on Autopia.