Gyeon Q² Mohs EVO uses fluoro modified polysilazanes for the first time in the car care industry. Why is that so important? Modifying polysilazanes at the precursory stages bring enormous benefits on all levels: durability, chemical resistance or ease of use. Amazingly easy to apply and wipe off, yet extremely chemical resistant. Slick and smooth, yet very durable. Gloss and extreme hydrophobic are just value-added.

The classic Q² Mohs was known as a multilayer product. Its EVO version changes that and now allows a simple and very straightforward application with just one layer. Thanks to the formula, but also our Q²M CoatingApplicator, 30ml of the EVO formula equal at least 50ml of the retired, classic product delivering even improved performance.

All EVO formulas can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast! The coating should not get wet in the first 12 hours after application.

• Consumption: 15-25ml (per car)
• PH Tollereance: 2-11
• Durability: Up to 36 MONTHS / 40KKM for 1 layer & 48 MONTHS / 50KKM for 2 layers

Sizes Available: 30ml

Kit Contains: Q2 Mohs EVO, Q2M Coating Applicator, Q2M Cure 100ml, Booklet, Stickers.

The post Gyeon Q2 Mohs Evo – 30ML + CURE Kit ( 3 YEAR ) appeared first on Autopia.

Gyeon Q² One EVO brings the benefits of all forms of protection together. As easy to apply as a natural wax, glossy like a real glaze, durable and resistant as regular coatings. This fast-curing formula requires no special equipment and transforms your garage into a detailing studio.

• Consumption: 25 – 30ml Per Car
• pH Tolerance: 2 – 11
• Durability: 24 Months or 25,000km

Size: 30ml & 50ml
Kit Contains: Gyeon Q2 ONE EVO, Q2M Cure 100ml, Manual, Applicator & Stickers

If you require the coating only, consider looking at Gyeon Q2 One EVO Light.

The post Gyeon Q2 ONE Evo Light – 30ML + CURE Kit appeared first on Autopia.

Q²M Tire Express is the ultimate everyday tyre & rubber dressing offering fantastic looks matched with a simple, straightforward application. It will restore the “factory fresh” look of the tyre and keep it for many a hundred miles.

QUICK & EASY DAILY TYRE DRESSING

Being water based, it’s extremely easy to apply and allows both a dry and wet application. It spreads on the surface very well with just one wipe and doesn’t require rubbing into the surface like our SiO2 infused Q² Tire.

MATTE LOOK

Q²M Tire Express provides a very deep, natural and matte visual effect. It builds a repellent, self cleaning layer that helps to keep the tyre clean and will not diminish even during a long drive in rainy conditions.

BEST PRACTICE AND PRO-TIPS FROM YVES HEYLEN

There is no easier way to to refresh the look of your vehicle tyres. With a simple and straight forward application, Q²M TireExpress is the perfect daily tyre dressing. TIP: To get the most out of the product, use it on a damp tire right after the wash. Spread it evenly and let dry. A subtle, factory fresh look will be the result.

CONSUMPTION: 10-15ml/ set
DURABILITY: >2 washes

The post Gyeon – Q2M Tire Express 500ML appeared first on Autopia.

Gyeon Q²M MF Applicators are designed to speed up the quartz coating application process and facilitate perfectly even coverage on all automotive surfaces, both inside and out.

A high quality microfibre outer wrapped around a soft sponge core ensures perfect adjustment to the shape of the work area, while the pocket on the top provides added comfort and security. When used with quartz coatings, Gyeon Q²M MF Applicators should be discarded after use.

Directions
Discard after use (if used to apply a quartz coating) or else: (i) wash in a washing machine at a low temperature (40°C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment while not in use (lidded plastic storage boxes are ideal in this respect).

The post Gyeon Q2M MF Applicator – Pack of 2 appeared first on Autopia.

The post Gyeon Q2M Suede – 10×10 cm, Pack of 10 (Coating Applicator) appeared first on Autopia.

🛡️ Expected Durability

• Up to ~24 months (≈2 years) or around 25,000 km of protection with a single application under normal conditions. This is the lifespan claimed by Gyeon’s official documentation and retailer specs for the Q² One EVO formula that the Light version uses.

• Sources consistently report this ~24-month durability figure for Q² One EVO products, including Light versions.

📊 Factors That Affect Real-World Durability

The quoted 24 months is ideal performance, but actual results can vary depending on:
✔ Driving conditions (city vs long highway, salty/wet conditions)
✔ Frequency of maintenance washes and topping products (e.g., Gyeon Cure)
✔ Climate (harsh winters, high UV, etc.)
✔ Application quality and surface prep

Some detailers note that under more demanding use or harsher climates, you might see durability shorter than the ideal 24 months — especially if you don’t maintain with boost sprays or detail regularly — though this will vary widely by environment and care routine. (Anecdotally from detailing communities, coatings sometimes last closer to ~12–18 months on daily drivers in tough conditions.)

📌 Tips to Maximize Durability

✅ Thoroughly prep and decontaminate paint before application
✅ Avoid washing with strong chemicals for ~14 days while the coating cures
✅ Use maintenance sprays like Gyeon Cure periodically
✅ Avoid pressure washing and harsh cleaners where possible during the coating’s lifespan

THE ONE YOU NEED. A SIMPLE TO USE, YET BRILLIANTLY EFFECTIVE AND DURABLE ENTRY LEVEL CERAMIC COATING.
Q² One EVO brings the benefits of all forms of protection together. It remains as easy to apply as natural wax, remains durable and resistant as a regular coating.

LIGHTBOX CONTAINS: Q² ONE EVO / Q²M COATING APPLICATOR LIGHT / INSTRUCTION MANUAL / MAINTENANCE BOOKLET MINI / DOOR STICKERS / #GYEONIZED STICKER

EASY & DURABLE
With the introduction of EVO formulas, Q² One EVO is even more simple to apply than before. It delivers great durability, improved by 50% compared with its previous version. More performance and higher chemical resistance make it a great entry-level coating for any enthusiast.

GLOSSY & HYDROPHOBIC
With its superb beading, Q² One EVO meets all expectations of car care enthusiasts. Beading would be however nothing without the intense candy gloss.

NO GARAGE? NO PROBLEM!
All EVO formulas can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast! The coating should not get wet in the first 12 hours after application.

BEST PRACTICE AND PRO-TIPS FROM YVES HEYLEN
Apply the product liberally in your favourite motion in small sections – maximum 50x50cm. Wipe off immediately with either the Q²M SoftWipe or Q²M PolishWipe. Q² One EVO builds a thick layer, so you will need an absorbent towel. TIP: The choice of towels for coating wipe off is extremely important. Do not stick to just one type – depending on paint and climate, even the Q²M Suede might be the best choice for perfecting the surface.

The post Gyeon Q2 ONE Evo Light – Ceramic Coating (Up to 24 months) appeared first on Autopia.

Gyeon Q² Mohs EVO Light is a state of the art quartz coating that simultaneously protects and enhances the appearance of automotive paint. Developed in Japan, Gyeon Q² Mohs EVO Light uses the latest in low volatile content silicon (Si) technology to lay down a hybrid film of perhydropolysilazane (PHPS), hydroxyl-rich organic copolymers and poly(methyl methacrylate) (PMMA) that condenses rapidly to form an amorphous organic-silica nano-composite that chemically bonds to painted surfaces at the molecular level. Unlike rival products, Gyeon Q² Mohs EVO Light actually gains molecular weight as it cures (as skeletal Si-N bonds are replaced with Si-O bonds), which improves its structural integrity and restricts its shrinkage to 5% during the curing process (the average figure for SiO2 coatings is 30%). As a result, each coat of Gyeon Q² Mohs EVO Light imparts a measurable 0.2 micron increase in total paint thickness, and significantly improves the scratch resistance of the underlying finish; on average, each coat adds two grades of hardness (2H) on the pencil hardness scale.

As a result of being coated with an ultra-smooth, extremely dense layer of this organic-silica nano-composite, treated surfaces become hydrophobic (water-hating), which causes rainfall and rinse water to bead up and roll off very quickly. This beading action not only looks good, but also tends to pick up and carry away fresh contaminants, which, combined with the naturally high scratch resistance of the coating, makes routine washing easier and much safer. In addition to this strong self-cleaning effect, Gyeon Q² Mohs EVO Light also provides excellent protection against bird droppings, bug splatter, road salt and harmful UV radiation for up to two years at a time, even on daily drivers (it is impervious to cleaning chemicals and pressure washing, and once fully cured can only be removed by machine polishing). Gyeon Q² Mohs EVO Light is currently supplied as a pre-packed kit containing either a 30 ml or 50 ml bottle of Gyeon Q² Mohs EVO Light, a Gyeon Q²M Applicator, Stickers, and an instruction booklet.

You should apply Gyeon Q² Mohs in a dry place out of direct sunlight. In all cases, prepare the surfaces you are going to treat in the normal way (wash > decontaminate > polish), and then do a wipe down with Gyeon Q²M Prep to ensure that they are spotlessly clean. Next, using the supplied dropping pipette, lightly wet a Gyeon Q²M Applicator Suedes with Gyeon Q² Mohs, wrap it around a Gyeon Q²M Applicator Block and begin wiping it evenly on to the first panel, using light pressure and overlapping strokes. You should aim to treat no more than a single panel at a time, because after an initial volatilization period of 1-2 minutes you must then buff off the (still wet) residue as quickly as possible, i.e. before it begins to harden. Buffing off is best accomplished with a PB Super Buffing Towel using moderate speed and pressure in order to fully remove the residue and reveal an intense streak-free shine. Using a bright light, check the panel carefully for any smears and remove them before moving on; failure to remove smears fully can result in them hardening to the point of being impossible to remove without machine polishing, so make sure you are thorough!

After all panels are treated wait for a minimum of an hour and then apply a second coat. The car must then be left in a dry place out of direct sunlight for a minimum of 24 hours to allow the layers to harden (if you wish, you can accelerate this process by heating the treated panels to 60°C for 10 minutes using an infra-red heat lamp). Finally, to reduce the risk of water spots forming while it continues to cure (full curing takes around 14 days to achieve), you should apply a final topcoat of Gyeon Q²M Cure (you should also avoid washing the car with any kind of detergent for 7 days following application). Please note that you must discard all used applicators and towels after you’ve applied each coat of Gyeon Q² Mohs because it becomes extremely hard as it cures, forming a residue that has the potential to inflict severe marring or worse if applicators and towels are re-used. Furthermore, after each use you must also replace the dropping pipette with the air-tight cap, and wash out the pipette with hot running water. Failure to follow these steps will most likely result in any leftover product setting solid in the bottle and the dropping pipette, rendering them unusable in the future.

Beading: 8/10 (Compared to others)

Durability: 36 months (Single Layer)

Slickness: 9/10 (Compared to others)

LIGHTBOX CONTAINS: Q² MOHS EVO / Q²M COATING APPLICATOR LIGHT / INSTRUCTION MANUAL / MAINTENANCE BOOKLET MINI / DOOR STICKERS / #GYEONIZED STICKER

BOTTLE SIZE 30ML

The post Gyeon Q2 MOHS Evo – 3 Year Ceramic Coating appeared first on Autopia.

What makes them special? Most of all their shape. They are very convenient to work with and allow precise application, even in hard to reach areas. The shape makes them very ergonomic and the Q²M WaxApplicators are laser cut and have a “G” logo on one side.

The post Gyeon Q2M Wax Applicator – Pack of 2 appeared first on Autopia.

GYEON Q2M Water Spot Remover is an effective solution for removing unsightly water spotting deposits from paintwork.

Water spotting occurs in hard water area and from regular rainfall as the water evaporates from the suface leaving behind calcium and mineral deposits, a problem that is most obvious in summer. GYEON Q2M Water spot is a mild acid cleaner that gently dissolves these deposits from the paintwork.

GYEON Q2M Water Spot remover is very easy to use. Before applying, clean the bodywork with a gentle, pH-neutral shampoo such as Gyeon Bathe and dry the surface. Then spray directly onto the paint or on a microfiber cloth and wipe the area affected with water spots.If there is strong staining, spray generously directly onto the surface and wipe the surface a few times with a microfibre. If required – repeat.

GYEON Q2M WaterSpot is thick and oily, so very little product is required to cover a large area. It does not diminish or dry fast, so the cleaned area can be wiped multiple times.

Features & Benefits:

• Dissolves water spot marks quickly
• Ideal for use on vehicles protected with nanotechnology-based quartz coatings
• Particularly useful for freshly applied nanotechnology-based quartz coatings
• Lubricating oils reduce chances of marring paintwork
• Pre-diluted – ready to use

Technical Specification:

• Bodywork safe
• Quartz coating safe
• Mildly acidic (pH 4-5)
• Coverage: 15ml / panel

Available in 1 Litre & 500ml Bottle with sprayer

The post GYEON Q²M Water Spot Remover appeared first on Autopia.

Gyeon Q2 ONE Light is an entry-level ceramic coating from Gyeon, bringing advanced quartz technology combined with the user-friendly characteristics of a wax. Not only is Q2 ONE Light easy to use, it’s glossy like a show glaze and durable like a regular coating.

Q2 ONE Light features a fast-curing formula, excellent seal cleaning abilities and incredible water beading, meaning application and future maintenance is easy.

Please Note: This is the light version of Q2 ONE containing the coating only. For the full kit see the following product: Gyeon Q2 ONE.

Specifications:

• Consumption: 30ml/ car / 50ml
• Hardness: 9H
• Contact angle: >100′
• pH tolerance: 2-11
• Thickness: 0,2 – 0,5qm
• Durability: >12 months / 12,000 miles

The post GYEON – Q² ONE Light – ( 1 Year Ceramic Coating ) appeared first on Autopia.