1. Deep, Long-Lasting Shine
Autopia Black Gleam delivers a rich, solvent bases, high-gloss finish that makes tyres and trim look freshly detailed — not dull or faded. It enhances colour and keeps that “just-treated” look for longer than average dressings.

2. Protects From UV & Environmental Damage
Our advanced formula shields rubber and plastic from harmful UV rays, oxidation and fading. That means your tyres and trims stay darker and healthier — not chalky or cracked over time.

3. Easy Application — No Mess, No Fuss
The product spreads smoothly and evenly with minimal effort. It doesn’t sling off at speed, and dries without sticky residues, making it ideal for both novices and professionals.

4. Water-Resistant & Durable Finish
Once cured, the dressing locks in moisture and repels light rain and wash water, helping reduce the need for frequent reapplication.

5. Safe on All Tyre & Trim Types
Autopia Black Gleam is formulated to be safe on all rubber, vinyl and plastic trim surfaces — no greasy wipe-offs that attract dust or dirt.

6. Enhances Overall Vehicle Appearance
A well-dressed set of tyres and clean trim instantly elevates the look of any car — from show cars to daily drives — giving a polished, showroom-ready aesthetic.

The post Autopia Black Gleam – Tyre & Trim Dressing appeared first on Autopia.

Gyeon Q2 Trim EVO is an extremely long-lasting quartz-based coating developed specifically to enhance and protect exterior plastics & trim. Gyeon Q2 Trim utilises an alcohol-free, rapidly condensing formula which allows for easy application that bonds to plastics at a molecular level to create a durable coating that simply cannot be matched by traditional nano, polymer, or oil-based formulas.

Gyeon Q2 Trim EVO rejuvenates faded, oxidised plastics to leave a natural satin, factory-looking finish that doesn’t wash off or streak down the paintwork at the first sign of rain. Because the formula of Gyeon Q2 Trim EVO is based on the same SiO2 quartz coatings found within the rest of the Gyeon line it is naturally resistant to strong wash chemicals and extremely durable. Expect a coat to offer trim protection from the elements for up to 36 months. Like the other Gyeon coatings, Gyeon Q2 Trim EVO is also hydrophobic and as such very hydrophobic so washing and rain sheets the dirt off, keeping the trim looking cleaner for longer while eliminating the need to apply other dressing during the time it’s on.

Kit Contains:

1 x Q2 Trim EVO 30ml
3 x Microsuede Applicator Cloths
1 x Applicator Block
1x Instruction Manual

Technical:

• Durability: 36months /50K km
• pH tolerance: pH 2-11
• Consumption: 10ml / Car

The post GYEON Q2 Trim EVO- 30ml appeared first on Autopia.

If your trim isn’t looking factory fresh, DIY Detail Trim Restore and Protect will return it to better than new condition. Using advanced whetting technology DIY Detail Trim Restore and Protect revitalizes your trim, adding a black dye to give it the dark look you desire.

Adding long lasting ceramic protection your coating will enjoy long term protection to keep its new found youthful appearance.

Size: 30ml (1oz)

The post DIY Detail Trim Restore & Protect – 30ml appeared first on Autopia.

The post Collinite 360* ALL NITE – Trim Dressing -473ml appeared first on Autopia.

The post Fictech Slick 718- Plastic / Tyre Renovator 250ML appeared first on Autopia.

Protect, Darken & Restore Exterior Trim

Over time, exposure to the sun and the elements, exterior vinyl and rubber surfaces start to fade and show their age. Meguiar’s Hybrid Ceramic Trim Restorer is the perfect solution for making non-painted exterior trim and plastic look refreshed and new again. This hand-applied cream revives and renews exterior rubber, vinyl, and plastic trim pieces such as non-painted bumpers, moldings, door handles, rearview mirror housings, and windshield cowlings. Since it’s a hand-applied formula, you have full control without the risk of getting overspray on the surrounding paint. If your exterior grey or black trim pieces don’t look quite as dark or as rich as they used to, Hybrid Ceramic Trim Restorer will revitalize it, add a dark rich shine, and it will offer much-needed hybrid ceramic protection to defend against the sun and elements.

Tips for getting the best results with Hybrid Ceramic Trim Restorer

• Shake product well.
• Work on a cool, dry surface in the shade.
• Also, make sure the surface is clean so the trim restorer and protectant will perform best with maximum shine, protection, and durability.
• If deep cleaning is needed, clean non-painted vinyl, rubber, and plastic surfaces with a good all purpose cleaner like Meguiar’s DRTU10732 Citrus Power Cleaner Plus.  Agitate thoroughly with a cotton terry towel or brush. Make sure vinyl, rubber, or plastic is fully dry. By doing this, you will thoroughly clean and remove all dirt, grime, and pre-existing dressing.
• Dispense a quarter-size amount of product onto an applicator pad or towel.
• Work the product evenly onto one section of the exterior trim at a time.
• Allow the product to dry for 5-10 minutes (the longer the product remains on the surface, the darker the appearance).
• Wipe off excess with a microfiber towel.
• Severely oxidized surfaces benefit from 2-3 applications as additional applications can improve darkness.
• If the product gets on the paint or glass, remove it with a clean towel.

The post Meguiars Hybrid Ceramic Trim Restorer – 473ml appeared first on Autopia.

The post 303 Graphene Trim Coating / Protectant appeared first on Autopia.

With its complex base of siloxane polymers TRIM ‘X’ when applied will cross link and bond to the surface it is applied to giving a gloss sheen and enhanced durability. In effect it forms a skin which acts as a barrier to water and road film. For increased gloss and durability a second layer can be applied either by microfibre, brush or foam applicator. If a less glossy appearance is desired then TRIM ‘X’ can be diluted with water for added economy and a more satin finish.

With its ‘anti sling’ properties the car can be driven a very short time after it has been applied to tyre unlike some of the alternative products on the market.

Comes in a pleasant grape fragrance although everyone so far calls it ‘Parma Violet’ flavour !!!!

The ideal companion to MIST ‘X’ …..

The post KKD TRIM-X Tyre & Trim Sealant – 500ML appeared first on Autopia.

How It Works
G6 Hyper Coat restores and protects vinyl, rubber, and plastic car parts with a brand new look and brilliant shine. Chemical Guys blended synthetic polymers with proprietary G6 technology to create a liquid trim sealant for use inside or outside any vehicle. The water-based Hyper Coat formula nourishes dried-out and sun-faded parts to rejuvenate a deep-black new appearance with a bright wet shine. G6 trim sealant technology repels the harsh UV light and extreme heat that damages, cracks, and fades plastic and rubber parts. Treat exterior bumpers, door mirrors, window mouldings, grilles, vents, and tires to get rid of any sun-faded chalky white look. Restore a brand-new appearance to interior door panels, centre consoles, upholstery, dashboards and engine bay components. G6 Hyper Coat finishes dry to the touch, and will not attract dirt or dust. The refined formula penetrates deep to nourish the material, and leaves no residue to smear or streak over nearby surfaces. Specialty sun blocking agents repel harmful UVA and UVB rays that fade and damage car parts prematurely, helping them look newer for longer. Choose G6 Hyper Coat to restore, enhance, and protect any interior or exterior vinyl, rubber, or plastic car parts with a bright wet shine.

Use This Dressing To: 

• Get rid of sun-faded chalky look
• Prevent trim from premature fading
• Rejuvenate a rich and new appearance
• Protect a variety of surfaces with 1 product
• Spray instant shine and protection

Versatile Extreme Shine Formula:

G6 is blended with synthetic polymers and proprietary technology to create a liquid trim sealant for use inside or outside any vehicle. The water-based Hyper Coat formula nourishes dried-out and sun-faded parts to rejuvenate a deep-black new appearance with a bright wet shine. The refined sprayable formula spreads out evenly the first time, reducing the need to reapply dressing over uneven areas.

Special Blend Protects Fragile Trim:

G6 trim sealant technology repels the harsh UV light and extreme heat that damages, cracks, and fades and damages plastic and rubber parts, helping them look new for longer. G6 Hyper Coat finishes dry to the touch, and will not attract dirt or dust. The refined formula penetrates deep to nourish the material, and leaves no residue to smear or streak over nearby surfaces.

The post Chemical Guys Hypercoat Dressing – Rubber & Plastic Restorer appeared first on Autopia.

How to use it:

1. Clean surface with an all-purpose cleaner or interior cleaner.
2. Shake, then apply 2 – 5 sprays or a few drops of dressing directly into foam or microfiber applicator pad.
3. Spread dressing over the entire workpiece, then work and rub deep into the surface.
4. Buff off any excess residue with a microfiber towel.
5. Wait 5-10 minutes and add additional layers as needed.

The post Chemical Guys – Gel Black Forever Trim & Tire, (Oil Based) 473ml appeared first on Autopia.