Manual cleaning :

• Light soiling : Dilute between 2% (20 ml/L) and 5% (50 ml/L) of water, i.e. a ratio of 1:50 to 1:20.
• Medium soiling : Dilute between 5% (50 ml/L) and 10% (100 ml/L) of water, i.e. a ratio of 1:20 to 1:10.
• Heavy soiling : Dilute between 10% (100 ml/L) and 25% (250 ml/L) of water, i.e. a ratio of 1:10 to 1:4.
• Application : Apply using a hand or air sprayer, then agitate with a brush, paintbrush or microfiber depending on the surface.
• Rinsing : Rinse thoroughly with clean water to remove residue.
• Wiping : For certain surfaces (plastic interiors, windows, etc.), wipe with a clean microfiber cloth without rinsing.

Apply the product : Then, spray evenly over the surface to be cleaned, making sure to cover each area.

Leave to act : Furthermore, let the product act for 2 to 5 minutes, depending on the intensity of the dirt. However, be careful not to let it dry on the surface, which could affect its effectiveness.

Shake : Then, remove stubborn residue using a brush, paintbrush, or microfiber cloth. This maximizes cleaning efficiency and ensures impeccable results.

Rinse : Afterwards, rinse thoroughly with clean water to remove all product residue and dirt, leaving a clean and shiny surface.

Wipe : Finally, for specific surfaces like interior plastics or windows, simply wipe with a clean microfiber cloth. Therefore, no additional rinsing is necessary for these areas, simplifying and speeding up the finishing process.

Caution: Due to its high foaming power, it is essential to adjust your dilution when using with a compressed air sprayer or injector-extractor. This will help limit excess foam and ensure efficient application without complications.