Responsive menu button

Innovacar SP1 Prewash

9.9554.95

Description

SP1 Prewash by Innovacar is the most suitable car prewash product for eliminating a great amount of dirt in touchless mode, i.e. without touching the bodywork of the car. It is a refined solution which, regardless of the 11.50 pH, it guarantees safe use on delicate parts of the car, allowing you to work confidently.

The characteristics of this car detergent and prewash shampoo are:

  • It is an active foam: it creates a wet flat foam, specifically designed for easy application and spreading over every surface of the car. Thanks to its formula, it keeps the dirt particles suspended, making them easier to remove.
  • It is a deep organic decontaminant**it is the first prewash shampoo for car detailing with added enzymes, subject to patent protection*, that deeply clean** organic dirt, essentially the enzymes can act multiple times on the same particles and molecules of organic dirt substrate (like a layer of soil).
  • Quality raw materials: the shampoo is also made with plant-based surfactants, making it gentle on plastics and it does not contain any added sodium hydroxide, it does not contain added phosphorus, EDTA, NTA.
  • It is concentrated: The product is able to eliminate traffic film, bugs, oil and grease without any mechanical action. Even with a reduced quantity, it has a considerable washing power and truly deep cleaning*.
  • It makes rinsing easier: thanks to the presence of plant-based foam and surfactants, it is easy to rinse.
  • Clean scent: the product releases a pleasant clean scent and essence.
  • It respects the applied nanotechnologies: it is ideal for preserving the applied nanotechnological films to avoid damaging previously applied layers of paint or compromising future coating processes.

Average consumption: 50 ml per vehicle.

Summarised technical data:

  • Cleaning action: 5/5
  • Foam effect: 5/5
  • Self-cleaning capacity: 5/5
  • With added enzymes: YES
  • Coating safety: YES
  • Surface safety: YES
  • pH: 11.50
  • Prewashing in touchless mode without touching the bodywork of the car.
  • Using a single product, with due dilutions, also for cleaning road dirt and bugs.
  • Cleaning cars that have already been treated with nanotechnological car detailing, coating or polishing treatments to preserve the effects and not damage any previously performed work.
  • Cleaning cars that will then be subject to additional car detailing treatments such as polishing or coating.
  • Preparing the car correctly for the washing stage, reducing dirt residues which, in the washing stage with the glove, could cause damage to the surface.

How to wash the car with SP1 Prewash in the prewash stage:

  1. In the presence of mud, proceed with initial high pressure rinsing to generally remove dirt.
  2. If washing is carried out in the winter, use the product in a more concentrated form, while it is best to dilute it more in the summer.
  3. First proceed by applying the product to the dirtiest areas such as the bottom of the car, the rims and bugs and leave it on for about 1 minute. For an even more effective result, use 100% Degreasing.
  4. Proceed by spraying the diluted product on the entire car, starting on the bottom and applying it horizontally to then gradually move upwards. This will prevent any dripping when rinsing away any drips.
  5. Wait from 1 to 3 minutes and take care not to let the product dry.
  6. Proceed with touchless rinsing, horizontally, with plenty of high pressure water, starting from the top of the car and gradually working downwards.

If applied with a foam lance or foam gun: the recommended dilution ranges from 1:3 to 1:9, use from 250 ml to 100 ml of product and add the remaining part of water (from 750 ml to 900 ml) to obtain 1 L of ready-for-use solution. During supply, the actual final dilution can reach approximately 1:60 to 1:150.

For frequent cleaning, the dilution can reach 1:15; i.e. use 60 ml of product and add the remaining part of water (940 ml) to obtain 1 L of ready-for-use solution. During supply, the actual final dilution can reach approximately 1:240.

If applied with a precompression pump: the recommended dilution is 1:50; use 20 ml of product and add the remaining part of water (980 ml) to obtain 1 L of ready-for-use solution.

For frequent cleaning, the dilution can reach 1:100; i.e. use 10 ml of product and add the remaining part of water (990 ml) to obtain 1 L of ready-for-use solution.

For intense dirt, the recommended dilution is 1:25; i.e. use 40 ml of product and add the remaining part of water (960 ml) to obtain 1 L of ready-for-use solution.

For bugs and the bottom part of the car: the recommended dilution is 1:25; i.e. use 40 ml of product and add the remaining part of water (960 ml) to obtain 1 L of ready-for-use solution

For rims and tyres: the recommended dilution ranges from 1:5 to 1:15, use from 200 ml to 70 ml of product and add the remaining part of water (from 800 ml to 930 ml) to obtain 1 L of ready-for-use solution.

Precautions: do not allow the product to dry and do not apply it in the sun or on hot surfaces. The product can be applied to dry bodywork, but in the summer or in extremely hot areas, it is advisable to rinse the car to lower the temperature and avoid it from drying during application.

Additional information

Size

100ML, 1L, 4.5L

© 2024 Autopia .
Email me when this product is back in stock We will inform you when the product arrives in stock. Please leave your valid email address below.